I have a nice six position panel and custom harness with 25foot leads for sale
. This is a nice high quality assembly with pre-tinned copper marine wiring
. All.wires have identification printed on them every foot. Each switch has a resettable breaker.
Switch one is the nav/ anchor
with two sets of 25 foot leads.
Switch two is the Bilge
auto /manual with a 10guage 3 wire 25 foot lead and 15 amp battery
Switch three is a dedicated electronics
switch that has a six foot lead and an ATC 4 position panel attached to run up to 4 pieces of electrical
.equipment with individual.fuses.
Switch four is a pump
circuit with 25 foot leads.
Switches five and six are labeled accesory with each having 25foot leads.
The grounds are all attached to a common buss bar and the main panel power has a 40.amp.breaker in line.
Basically everything is here to.wire a medium sized boat
This is by far the most thought out system available for basic wiring
12 vt dc available.