KLswire, I have no connection to the seller, but I have owned 3
Aries, and other than the actual
plywood vane, there is nothing missing in the photos. The vane is probably stored under a bunk cushion on the
boat, but can be made for about $20 worth of
plywood. The
wheel adapter is the early
bronze model, which is not as easy to use as the later
aluminum, but works just fine. Just a side note!!! the
steering lines (as opposed to the course adjusting lines) can both be run from one side of the
cockpit, which leaves at least one side of the
cockpit open for going fore and aft. Use roller bearing blocks. If you understand that there will be some dissimilar metal issues, this seems like a hell of a good buy, but then I happen to love
Aries. Use the search
engine on this forum for Aries information. Just my opinion. ______Grant.
Linear Mode
Recent Discussions