1975 Ranger 28 Gary Mull Design with Universal Diesel M-18 and Hurth HBW 50
I had the
boat hauled and bottom painted in January of this year.
At that time, all through-hull fittings were replaced.
The
boat needs some TOC in the
cabin (currently in the process of painting it, etc)
It also needs a new
packing gland, a
diesel tank and an
engine alignment.
The
engine runs perfectly.
LOD : 28' 6"
Beam: 9' 6"
Draft: 4' 6"
Displacement: 6,000
Ballast: 2,700
1975 IOR style cruiser racer with a spacious cabin (6 standing room).
Fully functional marine head, two sinks.
Bottom paint is 5 months old. New through-hull fittings throughout!
In-board Universal Diesel M-18 (2 cylinder 14 horse power) just serviced and running perfectly.
Sail inventory:
US Sails main (good condition)
US Sails Genoa (Good condition)
US Sails Storm Jib (Good condition)
Starting forward is a comfortable v-berth. The entrance is generous and there are shelves on both side for your books, glasses, etc. Underneath are a couple of large storage areas for longer term "stuff".
Next aft is the head, with the fully functional marine toilet with pump out. There is a nice vanity to starboard. With a sink, medicine cabinet and mirror. There is a sliding privacy door between the head and the salon.
The salon has single settees to both port and starboard. The length of the port settee is extended by room to tuck your feet under the galley counter. The table folds up against the forward bulkhead when not in use. The drop leaf table can be used with either one or both leaves extended.
Storage is behind each of the settee cushions, with a shelf behind each settee. To starboard, there is a quarterberth tucked aft for guests or storage. The galley wraps around the companionway. There is single S.S. sink with manual water, and an icebox. There are several storage areas for your galley needs.
Interested? Call Eric @ 605.261.5865.
Just bought my first house and have no time to finish the boat! First $4400 takes it.
Linear Mode
Recent Discussions