Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 17-09-2009, 14:11   #1
Registered User
 
Cotemar's Avatar

Community Sponsor

Join Date: Dec 2007
Boat: Mahe 36, Helia 44 Evo, MY 37
Posts: 5,731
Fire Prevention and Suppression System aboard

Mahe's,

Here is our Fire prevention and suppression system aboard.
1) Have installed two talking Kidde Carbon monoxide & smoke detectors, one in each stateroom
2) Purchased 3 larger ABC fire extinguishers with gages
3) Mounted one in the cock pit under the table and one in each stateroom behind the doors and then two more in the main saloon

Mark
Attached Thumbnails
Click image for larger version

Name:	P8140022.jpg
Views:	350
Size:	396.9 KB
ID:	14775   Click image for larger version

Name:	P8140025.jpg
Views:	494
Size:	405.8 KB
ID:	14776  

Click image for larger version

Name:	P8140026.jpg
Views:	488
Size:	404.1 KB
ID:	14777   Click image for larger version

Name:	P8140031.jpg
Views:	359
Size:	401.4 KB
ID:	14778  

Click image for larger version

Name:	P8140049.jpg
Views:	520
Size:	358.0 KB
ID:	14779  
Cotemar is offline   Reply With Quote
Old 31-08-2010, 06:58   #2
Registered User
 
Cotemar's Avatar

Community Sponsor

Join Date: Dec 2007
Boat: Mahe 36, Helia 44 Evo, MY 37
Posts: 5,731
Emergency Tiller

Mahe’s,

Thought I would check out our “Emergency Tiller” before or if ever we may need it.

1) I stow it in the rear cockpit locker, so its easy and fast to retrieve it.
2) Note: It has a notch machined in one of the ends
3) Open your Starboard engine hatch
4) Insert the notched end into the top of the rudder post
Note: This will not work on the Port side rudder post, because of the battery box on top of the rudder post.

One person can install the “Emergency Tiller” in less than a minute.

Hope we never have to use it, but it’s nice to see how it works.

Mark
Attached Thumbnails
Click image for larger version

Name:	1.jpg
Views:	565
Size:	404.8 KB
ID:	18819   Click image for larger version

Name:	2.jpg
Views:	540
Size:	410.7 KB
ID:	18820  

Click image for larger version

Name:	3.jpg
Views:	419
Size:	349.7 KB
ID:	18821   Click image for larger version

Name:	4.JPG
Views:	456
Size:	400.0 KB
ID:	18822  

Click image for larger version

Name:	5.jpg
Views:	621
Size:	391.4 KB
ID:	18823   Click image for larger version

Name:	Rudder_Post.jpg
Views:	439
Size:	109.3 KB
ID:	18824  

Cotemar is offline   Reply With Quote
Old 31-08-2010, 08:38   #3
Registered User

Join Date: Jul 2010
Location: Montana
Posts: 391
I'd try and fabricate some way of keeping that thing in it's socket, under use. Also a lanyard to keep it from going overboard, just when you REALLY need it....

How heavy is the steering with it? Would you need some sort of block and tackle rig to use it?
__________________
Healer52 / Lisa, Rick and Angel the Salty Dog
Currently on the hard, looking for a boat
Healer52 is offline   Reply With Quote
Old 31-08-2010, 14:23   #4
Registered User

Join Date: Jun 2007
Location: SW Florida
Boat: FP Belize, 43' - Dot Dun
Posts: 3,823
Would it be possible/feasible to put a deck access in the engine room hatch that would allow you to steer with the tiller with the engine hatch closed?
Attached Files
File Type: pdf hatch.pdf (276.6 KB, 217 views)
DotDun is offline   Reply With Quote
Old 31-08-2010, 14:51   #5
Registered User
 
Cotemar's Avatar

Community Sponsor

Join Date: Dec 2007
Boat: Mahe 36, Helia 44 Evo, MY 37
Posts: 5,731
Emergency Tiller

DotDun,

You have a great idea, but unfortunately the deck fitting would not go through the engine hatch.
It would end up just under the stair transition (no flat spot just above the rudder post).

The solution FP uses is simple and secure and seemed to steer left and right fairly well.
Your idea would have been a great upgrade, but the step transition is the problem.

Mark
Cotemar is offline   Reply With Quote
Old 31-08-2010, 15:10   #6
Registered User

Join Date: Jun 2007
Location: SW Florida
Boat: FP Belize, 43' - Dot Dun
Posts: 3,823
Quote:
Originally Posted by Cotemar View Post
You have a great idea, but unfortunately the deck fitting would not go through the engine hatch.
Ah, I see now in the pictures after you explained it. Oh well, it works the way it is in case you ever need it. Let's hope you never use it!
DotDun is offline   Reply With Quote
Old 16-07-2012, 08:20   #7
Registered User
 
Cotemar's Avatar

Community Sponsor

Join Date: Dec 2007
Boat: Mahe 36, Helia 44 Evo, MY 37
Posts: 5,731
Fountaine-Pajots Builder's Plate explained

Have you ever wondered what the Fountaine-Pajots Builder's Plate means.

Definitions of Boat Design Categories.

‘A’ OCEAN: Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) (Gail force winds 34-40 knots) and significant wave heights of 4 m (13feet) and above but excluding abnormal conditions, and vessels largely self-sufficient.
With the Mahe you can safely have 8 people aboard

‘B’ OFFSHORE: Designed for offshore voyages where conditions up to, and including, wind force 8 (Gail force winds 34-40 knots) and significant wave heights up to, and including, 4 m (13feet) may be experienced.
With the Mahe you can safely have 8 people aboard

‘C’ INSHORE: Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions up to, and including, wind force 6 (Strong breeze 21- 26 knots) and significant wave heights up to, and including, 2 m (6.5 feet) may be experienced.
With the Mahe you can safely have 12 people aboard

‘D’ SHELTERED WATERS: Designed for voyages on sheltered coastal waters, small bays, small lakes, rivers and canals when conditions up to, and including, wind force 4 (Moderate breeze 11- 15 knots) and significant wave heights up to, and including, 0.3 m (1 foot) may be experienced, with occasional waves of 0.5 m (1.6 feet) maximum height, for example from passing vessels.
With the Mahe you can safely have 15 people aboard
Attached Thumbnails
Click image for larger version

Name:	Builders_Plate.jpg
Views:	317
Size:	108.1 KB
ID:	43496  
Cotemar is offline   Reply With Quote
Reply

Tags
mahe 36, safety equipment


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Attaching Equipment Adaero Construction, Maintenance & Refit 4 30-08-2009 12:32
USCG required safety equipment for 32' sailboat GWB Health, Safety & Related Gear 12 22-09-2008 23:08
Equipment? jojodir Cruising News & Events 9 29-11-2007 20:20
Safety Equipment clausont Marine Electronics 4 14-11-2007 07:57
Equipment Failures GordMay Construction, Maintenance & Refit 2 31-03-2003 16:47

Advertise Here


All times are GMT -7. The time now is 16:53.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.