Hey Helia owners.
I am stumped trying to help my buddy with a Helia 44. Right now the genny is
overheating. March
lift pump getting
water to genny, impeller good. No
raw water coming out of genny
exhaust, he says, "It has a water/gas separator".
Does this mean you WOULD NOT get raw
exhaust water out of the side of the
hull with exhaust? My
Leopard 44 can be switched in this regard. If this is the case then maybe a clogged exhaust
elbow or a bad
coolant thermostat. Any insight greatly appreciated. Thx, Scott