Thanks for the responses.
I was attempting to show tracks to the Bahamas
, and was in the properties of the track (mouse on track, right click, I think it was). Somehow I got all the waypoints laid onto each of the recording points of the track.
However, to the first response, I cannot seem to find the route. We don't use this as our primary nav tool; routes are in the chartplotter
, if, indeed, we bother to use them (usually it's either point and shoot - go in a straight line, end point determined by currents - or from single
waypoint to single
waypoint), so I can't seem to figure out how to delete a route.
The only route info I see is on the top bar (ctl-R), and clicking that does nothing. As to frequent opening, other than taking snaps of the routes for that discussion ("leaving to the Bahamas
in May" in CF), while I may have referred to it frequently, I am not doing routes or anything else which would change what's there.
So, for the dense (I'll be 73 in a couple of weeks, and sometimes miss stuff which otherwise might be obvious), what exact steps do I take to get to a route list, and delete what likely will be the only route in it?