In testing Ocpn_Draw + Watchdog Alarms
As Hakan says, the Deadman alarm does not seem to work, it does not alarm after the very short period I gave it.
Thank you for the "Test" button, it does work!
Also when trying a Ocpn_Draw "Boundary Inclusive" with the
Boat moved to inside the Boundary, when in Watchdog
1. Hit Configuration, Highlight "Boundary", Hit "Edit"
2. Select "Anchor Watch"
3. Select "Get Boundary ID" the blank space should fill with the Boundary ID.
4. Under "Alarm Action" check "Sound" make sure the path points to a *.wav file.
5. Hit "Test" to make sure the alarm sound works.
6. Check repeat alarm after 10 seconds.
7. Hit "Ok" the Configuration Menu "Enable all Alarms" should be checked and it should show "Boundary" "Sound repeat".
8. Hit "Ok" and the Watchdog Alarm menu is still open.
9. The Boundary Alarm says "Anchor inside boundary ______"
9. Now right click at some location outside of the "Inclusive Boundary" and select "Move the
boat here".
10. The alarm should sound. It does not. The Boundary message is still "Anchor inside boundary ______"
Somehow Watchdog is missing the fact that the boat moved.