Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 09-12-2024, 02:19   #31
Registered User

Join Date: Nov 2012
Location: Orust Sweden
Boat: Najad 34
Posts: 4,440
Re: Raspberry Pi 4 Installation of OpenCPN

Quote:
Originally Posted by wefleenor View Post
Anybody run into this issue? Thanks.
No, not me and I've for sure used the image 20 or more times like this:.
Create openplotter 4.x image and mount the card/SSD on a RPi.
When started, open application menu: OpenPlotter and start "Settings" following the advises here

In "Settings" you select the applications to install and use by e.g. OpenCPN Installer and SignalK installer.
Also consider the use of "Serial". Not necessary but I find it very handy.
Hakan is offline   Reply With Quote
Old 09-12-2024, 17:47   #32
Registered User
 
wefleenor's Avatar

Join Date: Nov 2010
Location: Pittsburg, CA
Boat: 49ft custom power catamaran
Posts: 140
Re: Raspberry Pi 4 Installation of OpenCPN

Quote:
Originally Posted by Hakan View Post
No, not me and I've for sure used the image 20 or more times
It turns out that the image was only for Bulleye, even though the name included OpenPlotter. Not sure how I managed that. I downloaded OpenPlotter image again and it worked as expected. Both images were uploaded to rpi via the rpi image software. Much large file than the first.

However, both the Bullseye/OpenCPN and the OpenPlotter fail to read my NMEA from a Maretron USB100. They both flash a connection every 3-8 seconds, so not sufficient to share with other devices. Both totally fail to read my radar input through the internet connection. Everythng worked fine with the same connection instructions with Buster and OpenPlotter and just OpenCPN. Any thoughts?
wefleenor is offline   Reply With Quote
Reply

Tags
enc, installation, opencpn

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why is OpenCPN Installation: Raspberry Pi link down? jimseng OpenCPN 6 26-05-2024 01:28
Raspberry (Buster) OpenCPN installation issue brice3010 OpenCPN 15 18-06-2023 00:26
Raspberry Pi and OpenCPN 3.1.915 spillemw OpenCPN 20 24-09-2012 03:30
Raspberry PI compiles OpenCPN monstads OpenCPN 7 15-03-2012 13:41
The Perfect Platform for OpenCPN ? Raspberry Pi night0wl OpenCPN 10 08-09-2011 20:09

Advertise Here


All times are GMT -7. The time now is 18:17.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2025, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.