Raspberry Pi 3

[Ivanm]

After opening Opencpn few monents later O closes seem like fix get lost .
I use a profolic usb to serial converter from Ais for Ais and gps data.
Screen connected with HDMI to VGA converter, can it be a power problem

[conachair]

Is that on the openplotter image? If so might be better asking on their forum-
OpenMarine

If not, give it a go - it's great

[transmitterdan]

Originally Posted by Ivanm

After opening Opencpn few monents later O closes seem like fix get lost .
I use a profolic usb to serial converter from Ais for Ais and gps data.
Screen connected with HDMI to VGA converter, can it be a power problem

Even if fix get lost O does not close. So I think maybe some other issue.

[Ivanm]

This did not happen while I had another display connected. Previous screen was smaller can't test as I don't have that screen any more.

[AedanC]

The Pi is very sensitive to its power supply. Make sure you are using a very powerful one (3+ Amps) and check the power lights. On a Pi 3 a red one comes on when the power supply is not managing. If that’s on or flickering then anything can happen.