Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 01-05-2024, 14:09   #1
Registered User

Join Date: May 2018
Boat: Voyage 440, 44'
Posts: 18
OpenCPN crashes when radar is transmitting

Hello, We use OpenCPN as our primary chartplotter. After we installed a NMEA2k network with B&G instruments we have had intermittent issues with the radar causing OpenCPN to crash.

Our configuration:
OpenCPN v5.8.4-0+1637c28
Radar Plugin v5.5.0 (was crashing with prior rev of the Radar plugin too)
Windows 11, v23H2, wifi connection to boat network
OpenCPN is an allowed app in the Windows Defender Firewall.
Ethernet Switch/Router: NETGEAR AC1600 Dual Band Gigabit WiFi Router (R6260)
NMEA2000 gateway - Victron Energy Cerbo signal K server broadcast on R6260 wifi. OpenCPN connection setup attached.
Radar: B&G Halo 20+, ethernet connection to R6260
Internet: Starlink, wifi router bypassed with ethernet connection to R6260
There is also a YachtDevices NMEA 2000 Ethernet Gateway model YDEN-02 connected to the NEMA bus and ethernet connection to the router but no configured connection to OpenCPN. It provides NEMA data to Navionics on our IOS devices via wifi/UDP.

Problems and supporting data:
When radar is transmitting, OpenCPN will crash within 1-10 minutes. If radar is not transmitting, OpenCPN seems stable.

Ran ipconfig / all with all systems listed above operating including both radars transmitting. Results below. (I am not fluent in networking. I would be grateful for an explanation that a non-network type can follow. THANK YOU!)

Windows IP Configuration

Host Name . . . . . . . . . . . . : DESKTOP-JH9M2R8
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Ethernet:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Ethernet Connection (10) I219-LM
Physical Address. . . . . . . . . : 4C-36-4E-D6-45-1C
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Ethernet adapter Ethernet 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek USB GbE Family Controller
Physical Address. . . . . . . . . : 4C-36-4E-D6-B0-C9
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Unknown adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : ExpressVPN TUN Driver
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Local Area Connection* 3:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter #3
Physical Address. . . . . . . . . : 7C-50-79-F8-6B-33
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Local Area Connection* 13:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter #4
Physical Address. . . . . . . . . : 7E-50-79-F8-6B-32
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wi-Fi:

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Wi-Fi 6 AX201 160MHz
Physical Address. . . . . . . . . : 7C-50-79-F8-6B-32
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d83c:6caa:8836:3673%18(Preferred)
IPv4 Address. . . . . . . . . . . : 10.0.0.6(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Wednesday, May 1, 2024 8:47:02 AM
Lease Expires . . . . . . . . . . : Thursday, May 2, 2024 8:47:02 AM
Default Gateway . . . . . . . . . : 10.0.0.1
DHCP Server . . . . . . . . . . . : 10.0.0.1
DHCPv6 IAID . . . . . . . . . . . : 175919225
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-2A-EC-DD-64-4C-36-4E-D6-B0-C9
DNS Servers . . . . . . . . . . . : 8.8.8.8
8.8.4.4
NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Bluetooth Network Connection:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 7C-50-79-F8-6B-36
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes

Mobile Broadband adapter Cellular:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Generic Mobile Broadband Adapter
Physical Address. . . . . . . . . : 88-87-94-42-52-5C
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

OpenCPN log file extract:
10:14:33.315 INFO logger.cpp:130 ------- OpenCPN version 5.8.4-0+1637c28 restarted at 2024-05-01 -------

10:14:33.315 INFO logger.cpp:130 Using loglevel INFO
10:14:33.315 MESSAGE ocpn_app.cpp:1234 wxWidgets version: wxWidgets 3.2.2.1 Microsoft Windows NT 64 bit wxMSW
10:14:33.315 MESSAGE ocpn_app.cpp:1239 OS Version reports as: 10.0
10:14:33.315 MESSAGE ocpn_app.cpp:1241 MemoryStatus: mem_total: 16099 mb, mem_initial: 24 mb
10:14:33.315 MESSAGE ocpn_app.cpp:1253 OCPN_OSDetail: x86_64 ; msvc-wx32 ; 10 ; ;
10:14:33.315 MESSAGE ocpn_app.cpp:1260 SData_Locn is C:\Program Files (x86)\OpenCPN\
10:14:33.315 MESSAGE ocpn_app.cpp:1275 PrivateDataDir is C:\ProgramData\opencpn\
10:14:33.330 MESSAGE ocpn_app.cpp:1364 Using existing Config_File: C:\ProgramData\opencpn\opencpn.ini
10:14:33.356 MESSAGE navutil.cpp:1263 winPluginDir, read from ini file:
10:14:33.356 MESSAGE navutil.cpp:1347 Setting Ownship Lat/Lon -16.0717, -142.367
10:14:33.363 MESSAGE navutil.cpp:3213 Switch InlandEcdis mode Off
10:14:33.369 MESSAGE styles.cpp:841 Styles loading from C:\Program Files (x86)\OpenCPN\uidata\styles.xml
10:14:33.373 MESSAGE styles.cpp:818 No styles found at: C:\ProgramData\opencpn\
10:14:33.373 MESSAGE styles.cpp:801 No styles found at: C:\ProgramData\opencpn\.opencpn\
10:14:33.397 MESSAGE styles.cpp:775 Using SVG Icons
10:14:33.398 MESSAGE ocpn_app.cpp:1425 Detected display size (horizontal): 254 mm
10:14:33.398 MESSAGE OCPNPlatform.cpp:874 Adding catalog lookup path: C:\Program Files (x86)\OpenCPN\share\locale
10:14:33.399 MESSAGE base_platform.cpp:394 Using private plugin dir: C:\Users\mkgod\AppData\Local\opencpn\plugins
10:14:33.399 MESSAGE OCPNPlatform.cpp:884 Adding catalog lookup path: C:\Users\mkgod\AppData\Local\opencpn\share\locale
10:14:33.399 MESSAGE OCPNPlatform.cpp:925 Getting DefaultSystemLocale...
10:14:33.399 MESSAGE OCPNPlatform.cpp:946 Found LanguageInfo for: English
10:14:33.399 MESSAGE ocpn_app.cpp:1461 System default Language: en
10:14:33.399 MESSAGE ocpn_app.cpp:1464 Config file language: en_US
10:14:33.399 MESSAGE ocpn_app.cpp:1469 Adjusted App language: en_US
10:14:33.399 MESSAGE OCPNPlatform.cpp:1006 ChangeLocale: Language load for: en_US
10:14:33.461 MESSAGE OCPNPlatform.cpp:1059 ChangeLocale: Locale Init OK for: en_US
10:14:33.461 MESSAGE OCPNPlatform.cpp:1084 Loading catalog for opencpn core.
10:14:33.463 MESSAGE OCPNPlatform.cpp:925 Getting DefaultSystemLocale...
10:14:33.464 MESSAGE OCPNPlatform.cpp:946 Found LanguageInfo for: English
10:14:33.464 MESSAGE ocpn_app.cpp:1476 Opencpn language set to: en_US
10:14:33.464 MESSAGE ConfigMgr.cpp:624 Loading Configs catalog: C:\ProgramData\opencpn\Configs\configs.xml
10:14:33.466 MESSAGE ocpn_app.cpp:1712 Creating MyFrame...size(1512, 957) position(-11, -11)
10:14:33.472 MESSAGE ocpn_frame.cpp:839 **** Connect stuff
10:14:33.481 MESSAGE OCPNPlatform.cpp:823 Starting OpenGL test...
10:14:33.901 MESSAGE OCPNPlatform.cpp:829 OpenGL test complete.
10:14:33.901 MESSAGE OCPNPlatform.cpp:850 OpenGL determined CAPABLE.
10:14:33.970 MESSAGE chcanv.cpp:990 Creating glChartCanvas
10:14:34.147 MESSAGE chcanv.cpp:2398 Metrics: m_display_size_mm: 254 g_Platform->getDisplaySize(): 2160:1440
10:14:34.147 MESSAGE chcanv.cpp:2403 wxDisplaySize(): 2160 1440
10:14:34.147 MESSAGE TCDataSource.cpp:50 Loading Tide/Current data source: C:\Program Files (x86)\OpenCPN\tcdata\harmonics-dwf-20210110-free.tcd
10:14:34.483 MESSAGE TCDataSource.cpp:50 Loading Tide/Current data source: C:\Program Files (x86)\OpenCPN\tcdata\HARMONICS_NO_US.IDX
10:14:34.728 MESSAGE chartsymbols.cpp:708 ChartSymbols loaded from C:\Program Files (x86)\OpenCPN\s57data\chartsymbols.xml
10:14:34.799 MESSAGE ocpn_frame.cpp:8535 Using s57data in C:\Program Files (x86)\OpenCPN\s57data
10:14:35.336 MESSAGE chartdb.cpp:214 ChartDB Cache policy: Application target is 1024 MBytes
10:14:35.336 MESSAGE chartdbs.cpp:156 Loading chart db version: V018
10:14:35.336 MESSAGE chartdbs.cpp:1210 Chartdb: Chart directory list follows
10:14:35.336 MESSAGE chartdbs.cpp:1229 Chart directory #0: C:\Users\mkgod\OneDrive\Charts\CM93 - 2015
10:14:35.337 MESSAGE chartdbs.cpp:1229 Chart directory #1: C:\Users\mkgod\OneDrive\Charts\MBTILES\Pacific - East
10:14:35.337 MESSAGE chartdbs.cpp:1229 Chart directory #2: C:\Users\mkgod\OneDrive\Charts\MBTILES\French Polynesia
10:14:35.337 MESSAGE chartdbs.cpp:1229 Chart directory #3: C:\Users\mkgod\OneDrive\Charts\MBTILES\Cook Islands
10:14:35.347 MESSAGE ocpn_app.cpp:1881 GPS Watchdog Timeout is: 10 sec.
10:14:35.347 MESSAGE chartdb.cpp:1123 OpenChartUsingCache, NOT in cache: cache size: 0

10:14:35.347 MESSAGE chartdb.cpp:1126 OpenChartUsingCache: type 7 C:\Users\mkgod\OneDrive\Charts\CM93 - 2015\
10:14:35.347 MESSAGE chartdb.cpp:1169 Creating new chart
10:14:35.347 MESSAGE chartdb.cpp:1286 Initializing Chart C:\Users\mkgod\OneDrive\Charts\CM93 - 2015\
10:14:35.348 MESSAGE cm93.cpp:4600 CM93Composite Chart Root is C:\Users\mkgod\OneDrive\Charts\CM93 - 2015\
10:14:35.364 MESSAGE cm93.cpp:913 Loaded CM93 Dictionary from C:\Users\mkgod\OneDrive\Charts\CM93 - 2015\
10:14:35.368 MESSAGE cm93.cpp:4375 Loading CM93 cell C:\Users\mkgod\OneDrive\Charts\CM93 - 2015\02100600\F\02210652.F
10:14:35.402 MESSAGE cm93.cpp:4375 Loading CM93 cell C:\Users\mkgod\OneDrive\Charts\CM93 - 2015\02100600\D\02190651.D
10:14:35.426 MESSAGE ocpn_app.cpp:1961 OpenCPN Initialized in 6881 ms.
10:14:38.594 MESSAGE glChartCanvas.cpp:1038 OpenGL-> Renderer String: Intel(R) UHD Graphics
10:14:38.594 MESSAGE glChartCanvas.cpp:1047 OpenGL-> Version reported: 4.6.0 - Build 30.0.100.9864
10:14:38.594 MESSAGE glChartCanvas.cpp:1054 OpenGL-> GLSL Version reported: 4.60 - Build 30.0.100.9864
10:14:38.597 MESSAGE glChartCanvas.cpp:1137 OpenGL-> Texture rectangle format: de1
10:14:38.597 MESSAGE glChartCanvas.cpp:1152 OpenGL-> Using Vertexbuffer Objects
10:14:38.609 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:14:38.609 MESSAGE glChartCanvas.cpp:1220 OpenGL-> Using Framebuffer Objects
10:14:38.609 MESSAGE glChartCanvas.cpp:1223 OpenGL-> Using FBO Stencil buffer
10:14:38.609 MESSAGE glChartCanvas.cpp:1230 OpenGL-> Using Stencil buffer clipping
10:14:38.609 MESSAGE glChartCanvas.cpp:1235 OpenGL-> Using Scissor Clipping
10:14:38.609 MESSAGE glChartCanvas.cpp:1342 OpenGL-> Using s3tc dxt1 compression
10:14:38.619 MESSAGE glChartCanvas.cpp:1371 OpenGL-> Compressed tile size: 128kb (8:1)
10:14:38.620 MESSAGE glChartCanvas.cpp:1246 OpenGL-> Minimum cartographic line width: 1.0
10:14:38.620 MESSAGE glChartCanvas.cpp:1249 OpenGL-> Minimum symbol line width: 1.0
10:14:39.152 MESSAGE chartdb.cpp:1169 Creating new chart
10:14:39.152 MESSAGE chartdb.cpp:1286 Initializing Chart C:\Users\mkgod\OneDrive\Charts\MBTILES\Pacific - East\Pacific-East_TCL2023_Navionics.mbtiles
10:14:39.215 MESSAGE chartdb.cpp:1169 Creating new chart
10:14:39.215 MESSAGE chartdb.cpp:1286 Initializing Chart C:\Users\mkgod\OneDrive\Charts\MBTILES\Pacific - East\Pacific-East_TCL2023_GoogleSat.mbtiles
10:14:39.275 MESSAGE chartdb.cpp:1169 Creating new chart
10:14:39.275 MESSAGE chartdb.cpp:1286 Initializing Chart C:\Users\mkgod\OneDrive\Charts\MBTILES\Pacific - East\Pacific-East_TCL2023_BingSat.mbtiles
10:14:39.336 MESSAGE chartdb.cpp:1169 Creating new chart
10:14:39.336 MESSAGE chartdb.cpp:1286 Initializing Chart C:\Users\mkgod\OneDrive\Charts\MBTILES\Pacific - East\Pacific-East_TCL2023_ArcGIS.mbtiles
10:14:39.397 MESSAGE chartdb.cpp:1169 Creating new chart
10:14:39.397 MESSAGE chartdb.cpp:1286 Initializing Chart C:\Users\mkgod\OneDrive\Charts\MBTILES\French Polynesia\Tuamotos\FP_Tuamotus_TCL2023_Navionics.m btiles
10:14:39.449 MESSAGE chartdb.cpp:1169 Creating new chart
10:14:39.449 MESSAGE chartdb.cpp:1286 Initializing Chart C:\Users\mkgod\OneDrive\Charts\MBTILES\French Polynesia\Tuamotos\FP_Tuamotus_TCL2023_GoogleSat.m btiles
10:14:39.499 MESSAGE chartdb.cpp:1169 Creating new chart
10:14:39.500 MESSAGE chartdb.cpp:1286 Initializing Chart C:\Users\mkgod\OneDrive\Charts\MBTILES\French Polynesia\Tuamotos\FP_Tuamotus_TCL2023_BingSat.mbt iles
10:14:39.547 MESSAGE chartdb.cpp:1169 Creating new chart
10:14:39.547 MESSAGE chartdb.cpp:1286 Initializing Chart C:\Users\mkgod\OneDrive\Charts\MBTILES\French Polynesia\Tuamotos\FP_Tuamotus_TCL2023_ArcGIS.mbti les
10:14:39.636 MESSAGE ocpn_frame.cpp:4739 OnInitTimer...0
10:14:40.158 MESSAGE waypointman_gui.cpp:58 DPMM: 8.50394 ScaleFactorExp: 1
10:14:40.158 MESSAGE waypointman_gui.cpp:65 Looking for UserIcons at C:\ProgramData\opencpn\UserIcons/
10:14:40.158 MESSAGE waypointman_gui.cpp:68 Loading UserIcons from C:\ProgramData\opencpn\UserIcons/
10:14:40.159 MESSAGE navutil.cpp:1694 Loading navobjects from navobj.xml
10:14:41.036 MESSAGE navutil.cpp:1705 Done loading navobjects, 0 duplicate waypoints ignored
10:14:41.040 ERROR filefn.cpp:1045 File 'C:\ProgramData\opencpn\navobj.xml.changes' couldn't be removed (error 32: The process cannot access the file because it is being used by another process.)
10:14:41.040 MESSAGE navutil.cpp:1687 Applying NavObjChanges
10:14:42.134 MESSAGE ocpn_frame.cpp:4834 Getting .gpx layer files from: C:\ProgramData\opencpn\layers
10:14:42.135 MESSAGE navutil.cpp:1772 New layer 1: 2020-09-FakaReefs-OpenCPN Version
10:14:42.139 MESSAGE navutil.cpp:1792 Loaded GPX file C:\ProgramData\opencpn\layers\2020-09-FakaReefs-OpenCPN Version.gpx with 231 items.
10:14:42.250 MESSAGE ocpn_frame.cpp:4739 OnInitTimer...1
10:14:42.250 MESSAGE comm_drv_factory.cpp:54 MakeCommDriver: Signal K:10.0.0.04:3000
10:14:42.253 MESSAGE comm_drv_signalk_net.cpp:275 Opening Signal K WebSocket client: Signal K:10.0.0.04:3000
10:14:42.407 MESSAGE ocpn_frame.cpp:4739 OnInitTimer...2
10:14:42.409 MESSAGE base_platform.cpp:394 Using private plugin dir: C:\Users\mkgod\AppData\Local\opencpn\plugins
10:14:42.409 MESSAGE plugin_loader.cpp:246 PluginLoader: loading plugins from C:\Users\mkgod\AppData\Local\opencpn\plugins;C:\Pr ogram Files (x86)\OpenCPN\plugins
10:14:42.409 MESSAGE plugin_loader.cpp:171 Using PATH: C:\Users\mkgod\AppData\Local\opencpn\plugins;C:\Pr ogram Files (x86)\OpenCPN\plugins;C:\WINDOWS\system32;C:\WINDO WS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\Wi ndowsPowerShell\v1.0\;C:\WINDOWS\System32\OpenSSH\ ;C:\Program Files\dotnet\;C:\Users\mkgod\AppData\Local\Microso ft\WindowsApps;
10:14:42.410 MESSAGE plugin_loader.cpp:251 Loading plugins from dir: C:\Users\mkgod\AppData\Local\opencpn\plugins
10:14:42.410 MESSAGE plugin_loader.cpp:444 PluginLoader searching for PlugIns in location C:\Users\mkgod\AppData\Local\opencpn\plugins
10:14:42.416 MESSAGE plugin_loader.cpp:482 Found 5 candidates
10:14:42.416 MESSAGE plugin_loader.cpp:271 Checking plugin candidate: C:\Users\mkgod\AppData\Local\opencpn\plugins\clima tology_pi.dll
10:14:42.416 MESSAGE plugin_loader.cpp:336 Checking plugin compatibility: C:\Users\mkgod\AppData\Local\opencpn\plugins\clima tology_pi.dll
10:14:42.418 MESSAGE plugin_loader.cpp:1191 Plugin is compatible: true
10:14:42.418 MESSAGE plugin_loader.cpp:1206 PluginLoader: Loading PlugIn: C:\Users\mkgod\AppData\Local\opencpn\plugins\clima tology_pi.dll
10:14:42.426 MESSAGE base_platform.cpp:394 Using private plugin dir: C:\Users\mkgod\AppData\Local\opencpn\plugins
10:14:42.427 MESSAGE base_platform.cpp:724 Using plugin data path: C:\Users\mkgod\AppData\Local\opencpn\plugins;C:\Pr ogram Files (x86)\OpenCPN\plugins
10:14:42.427 MESSAGE base_platform.cpp:276 PlugInManager: Using data dirs from: C:\Users\mkgod\AppData\Local\opencpn\plugins;C:\Pr ogram Files (x86)\OpenCPN\plugins
10:14:42.428 MESSAGE base_platform.cpp:288 PlugInManager: using data dir: C:\Users\mkgod\AppData\Local\opencpn\plugins\clima tology_pi
10:14:42.428 MESSAGE icons.cpp:35 Loading toolbar icon: C:\Users\mkgod\AppData\Local\opencpn\plugins\clima tology_pi\UserIcons\climatology_pi.svg
10:14:42.428 MESSAGE icons.cpp:39 Loading toolbar icon: C:\Users\mkgod\AppData\Local\opencpn\plugins\clima tology_pi\UserIcons\climatology_rollover.svg
10:14:42.428 MESSAGE icons.cpp:43 Loading toolbar icon: C:\Users\mkgod\AppData\Local\opencpn\plugins\clima tology_pi\UserIcons\climatology_toggled.svg
10:14:42.428 MESSAGE base_platform.cpp:276 PlugInManager: Using data dirs from: C:\Users\mkgod\AppData\Local\opencpn\plugins;C:\Pr ogram Files (x86)\OpenCPN\plugins
10:14:42.429 MESSAGE base_platform.cpp:288 PlugInManager: using data dir: C:\Users\mkgod\AppData\Local\opencpn\plugins\clima tology_pi
10:14:42.444 MESSAGE plugin_loader.cpp:271 Checking plugin candidate: C:\Users\mkgod\AppData\Local\opencpn\plugins\Dashb oardSK_pi.dll
10:14:42.444 MESSAGE plugin_loader.cpp:336 Checking plugin compatibility: C:\Users\mkgod\AppData\Local\opencpn\plugins\Dashb oardSK_pi.dll
10:14:42.445 MESSAGE plugin_loader.cpp:1191 Plugin is compatible: true
10:14:42.445 MESSAGE plugin_loader.cpp:1206 PluginLoader: Loading PlugIn: C:\Users\mkgod\AppData\Local\opencpn\plugins\Dashb oardSK_pi.dll
10:14:42.450 MESSAGE base_platform.cpp:276 PlugInManager: Using data dirs from: C:\Users\mkgod\AppData\Local\opencpn\plugins;C:\Pr ogram Files (x86)\OpenCPN\plugins
10:14:42.450 MESSAGE base_platform.cpp:288 PlugInManager: using data dir: C:\Users\mkgod\AppData\Local\opencpn\plugins\Dashb oardSK_pi
10:14:42.450 MESSAGE base_platform.cpp:276 PlugInManager: Using data dirs from: C:\Users\mkgod\AppData\Local\opencpn\plugins;C:\Pr ogram Files (x86)\OpenCPN\plugins
10:14:42.451 MESSAGE base_platform.cpp:288 PlugInManager: using data dir: C:\Users\mkgod\AppData\Local\opencpn\plugins\Dashb oardSK_pi
10:14:42.451 MESSAGE base_platform.cpp:276 PlugInManager: Using data dirs from: C:\Users\mkgod\AppData\Local\opencpn\plugins;C:\Pr ogram Files (x86)\OpenCPN\plugins
10:14:42.452 MESSAGE base_platform.cpp:288 PlugInManager: using data dir: C:\Users\mkgod\AppData\Local\opencpn\plugins\Dashb oardSK_pi
10:14:42.454 MESSAGE plugin_loader.cpp:361 Skipping not enabled candidate.
10:14:42.454 MESSAGE plugin_loader.cpp:271 Checking plugin candidate: C:\Users\mkgod\AppData\Local\opencpn\plugins\gpsod ometer_pi.dll
10:14:42.455 MESSAGE plugin_loader.cpp:336 Checking plugin compatibility: C:\Users\mkgod\AppData\Local\opencpn\plugins\gpsod ometer_pi.dll
10:14:42.457 MESSAGE plugin_loader.cpp:1191 Plugin is compatible: true
10:14:42.457 MESSAGE plugin_loader.cpp:1206 PluginLoader: Loading PlugIn: C:\Users\mkgod\AppData\Local\opencpn\plugins\gpsod ometer_pi.dll
10:14:42.463 MESSAGE plugin_loader.cpp:361 Skipping not enabled candidate.
10:14:42.463 MESSAGE plugin_loader.cpp:271 Checking plugin candidate: C:\Users\mkgod\AppData\Local\opencpn\plugins\radar _pi.dll
10:14:42.464 MESSAGE plugin_loader.cpp:336 Checking plugin compatibility: C:\Users\mkgod\AppData\Local\opencpn\plugins\radar _pi.dll
10:14:42.466 MESSAGE plugin_loader.cpp:1191 Plugin is compatible: true
10:14:42.466 MESSAGE plugin_loader.cpp:1206 PluginLoader: Loading PlugIn: C:\Users\mkgod\AppData\Local\opencpn\plugins\radar _pi.dll
10:14:42.478 MESSAGE base_platform.cpp:276 PlugInManager: Using data dirs from: C:\Users\mkgod\AppData\Local\opencpn\plugins;C:\Pr ogram Files (x86)\OpenCPN\plugins
10:14:42.479 MESSAGE base_platform.cpp:288 PlugInManager: using data dir: C:\Users\mkgod\AppData\Local\opencpn\plugins\radar _pi
10:14:42.792 MESSAGE radar_pi.cpp:258 v5.5.0
10:14:42.794 ERROR radar_pi.cpp:1557 Config Loaded RadarCount=1
10:14:42.798 ERROR radar_pi.cpp:1663 Config Save RadarCount=2
10:14:42.808 MESSAGE radar_pi.cpp:280 Configuration file values initialised
10:14:42.808 MESSAGE radar_pi.cpp:281 Log verbosity = 0. To modify, set VerboseLog to sum of:
10:14:42.808 MESSAGE radar_pi.cpp:282 VERBOSE = 1
10:14:42.808 MESSAGE radar_pi.cpp:283 DIALOG = 2
10:14:42.808 MESSAGE radar_pi.cpp:284 TRANSMIT = 4
10:14:42.808 MESSAGE radar_pi.cpp:285 RECEIVE = 8
10:14:42.808 MESSAGE radar_pi.cpp:286 GUARD = 16
10:14:42.809 MESSAGE radar_pi.cpp:287 ARPA = 32
10:14:42.924 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:14:42.925 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:14:42.931 MESSAGE navico/NavicoReceive.h:88 Navico Halo A receive thread created, prio= 70
10:14:42.931 MESSAGE navico/NavicoReceive.h:108 radar addresses from ini file loaded
10:14:42.931 MESSAGE navico/NavicoReceive.h:110 Navico Halo A navico receive using addresses: 128406683/236.6.7.8:6678/236.6.7.9:6679/236.6.7.10:6680
10:14:42.931 MESSAGE navico/NavicoLocate.h:70 NavicoLocate thread created, prio= 100
10:14:43.015 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:14:43.016 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:14:43.024 MESSAGE navico/NavicoReceive.h:88 Navico Halo B receive thread created, prio= 70
10:14:43.025 MESSAGE navico/NavicoReceive.h:108 radar addresses from ini file loaded
10:14:43.025 MESSAGE navico/NavicoReceive.h:110 Navico Halo B navico receive using addresses: 128406683/236.6.7.13:6001/236.6.7.13:6003/236.6.7.14:6002
10:14:43.026 MESSAGE plugin_loader.cpp:271 Checking plugin candidate: C:\Users\mkgod\AppData\Local\opencpn\plugins\squid dio_pi.dll
10:14:43.027 MESSAGE plugin_loader.cpp:336 Checking plugin compatibility: C:\Users\mkgod\AppData\Local\opencpn\plugins\squid dio_pi.dll
10:14:43.027 MESSAGE plugin_loader.cpp:1191 Plugin is compatible: true
10:14:43.027 MESSAGE plugin_loader.cpp:1206 PluginLoader: Loading PlugIn: C:\Users\mkgod\AppData\Local\opencpn\plugins\squid dio_pi.dll
10:14:43.034 MESSAGE base_platform.cpp:276 PlugInManager: Using data dirs from: C:\Users\mkgod\AppData\Local\opencpn\plugins;C:\Pr ogram Files (x86)\OpenCPN\plugins
10:14:43.034 MESSAGE base_platform.cpp:288 PlugInManager: using data dir: C:\Users\mkgod\AppData\Local\opencpn\plugins\squid dio_pi
10:14:43.034 MESSAGE icons.cpp:145 Loading toolbar icon: C:\Users\mkgod\AppData\Local\opencpn\plugins\squid dio_pi\data\poi.svg
10:14:43.034 MESSAGE icons.cpp:149 Loading toolbar icon: C:\Users\mkgod\AppData\Local\opencpn\plugins\squid dio_pi\data\poi_rollover.svg
10:14:43.034 MESSAGE icons.cpp:153 Loading toolbar icon: C:\Users\mkgod\AppData\Local\opencpn\plugins\squid dio_pi\data\poi_toggled.svg
10:14:43.034 MESSAGE base_platform.cpp:276 PlugInManager: Using data dirs from: C:\Users\mkgod\AppData\Local\opencpn\plugins;C:\Pr ogram Files (x86)\OpenCPN\plugins
10:14:43.034 MESSAGE base_platform.cpp:288 PlugInManager: using data dir: C:\Users\mkgod\AppData\Local\opencpn\plugins\squid dio_pi
10:14:43.035 MESSAGE plugin_loader.cpp:361 Skipping not enabled candidate.
10:14:43.035 MESSAGE plugin_loader.cpp:251 Loading plugins from dir: C:\Program Files (x86)\OpenCPN\plugins
10:14:43.035 MESSAGE plugin_loader.cpp:444 PluginLoader searching for PlugIns in location C:\Program Files (x86)\OpenCPN\plugins
10:14:43.037 MESSAGE plugin_loader.cpp:482 Found 4 candidates
10:14:43.037 MESSAGE plugin_loader.cpp:271 Checking plugin candidate: C:\Program Files (x86)\OpenCPN\plugins\chartdldr_pi.dll
10:14:43.039 MESSAGE plugin_loader.cpp:336 Checking plugin compatibility: C:\Program Files (x86)\OpenCPN\plugins\chartdldr_pi.dll
10:14:43.039 MESSAGE plugin_loader.cpp:1191 Plugin is compatible: true
10:14:43.039 MESSAGE plugin_loader.cpp:1206 PluginLoader: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins\chartdldr_pi.dll
10:14:43.045 MESSAGE chartdldr_pi.cpp:305 chartdldr_pi:m_base_chart_dir: C:\Users\mkgod\OneDrive\Documents\Charts
10:14:43.047 MESSAGE plugin_loader.cpp:271 Checking plugin candidate: C:\Program Files (x86)\OpenCPN\plugins\dashboard_pi.dll
10:14:43.047 MESSAGE plugin_loader.cpp:336 Checking plugin compatibility: C:\Program Files (x86)\OpenCPN\plugins\dashboard_pi.dll
10:14:43.047 MESSAGE plugin_loader.cpp:1191 Plugin is compatible: true
10:14:43.047 MESSAGE plugin_loader.cpp:1206 PluginLoader: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins\dashboard_pi.dll
10:14:43.135 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:14:43.136 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:14:43.143 MESSAGE NavicoLocate.cpp:310 Located radar IP 10.0.0.7 port 1, interface 10.0.0.6 [128406683/236.6.7.8:6678/236.6.7.9:6679/236.6.7.10:6680]
10:14:43.143 MESSAGE NavicoLocate.cpp:330 Located Navico radar IP 10.0.0.7 port 2, interface 10.0.0.6 [128406683/236.6.7.13:6001/236.6.7.13:6003/236.6.7.14:6002]
10:14:43.145 MESSAGE plugin_loader.cpp:271 Checking plugin candidate: C:\Program Files (x86)\OpenCPN\plugins\grib_pi.dll
10:14:43.145 MESSAGE plugin_loader.cpp:336 Checking plugin compatibility: C:\Program Files (x86)\OpenCPN\plugins\grib_pi.dll
10:14:43.146 MESSAGE plugin_loader.cpp:1191 Plugin is compatible: true
10:14:43.146 MESSAGE plugin_loader.cpp:1206 PluginLoader: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins\grib_pi.dll
10:14:43.149 MESSAGE plugin_loader.cpp:361 Skipping not enabled candidate.
10:14:43.149 MESSAGE plugin_loader.cpp:271 Checking plugin candidate: C:\Program Files (x86)\OpenCPN\plugins\wmm_pi.dll
10:14:43.149 MESSAGE plugin_loader.cpp:336 Checking plugin compatibility: C:\Program Files (x86)\OpenCPN\plugins\wmm_pi.dll
10:14:43.153 MESSAGE plugin_loader.cpp:1191 Plugin is compatible: true
10:14:43.153 MESSAGE plugin_loader.cpp:1206 PluginLoader: Loading PlugIn: C:\Program Files (x86)\OpenCPN\plugins\wmm_pi.dll
10:14:43.158 MESSAGE wmm_pi.cpp:46 WMM: WMM model data loaded from file C:\Program Files (x86)\OpenCPN\plugins\wmm_pi\data\WMM.COF.
10:14:43.240 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:14:43.240 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:14:43.250 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:14:43.250 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:14:43.257 MESSAGE OCPNPlatform.cpp:1006 ChangeLocale: Language load for: en_US
10:14:43.261 MESSAGE OCPNPlatform.cpp:1059 ChangeLocale: Locale Init OK for: en_US
10:14:43.262 MESSAGE OCPNPlatform.cpp:1079 Loaded translation catalog for: opencpn-climatology_pi
10:14:43.263 MESSAGE OCPNPlatform.cpp:1079 Loaded translation catalog for: opencpn-radar_pi
10:14:43.265 MESSAGE OCPNPlatform.cpp:1079 Loaded translation catalog for: opencpn-chartdldr_pi
10:14:43.267 MESSAGE OCPNPlatform.cpp:1079 Loaded translation catalog for: opencpn-dashboard_pi
10:14:43.268 MESSAGE OCPNPlatform.cpp:1079 Loaded translation catalog for: opencpn-wmm_pi
10:14:43.268 MESSAGE OCPNPlatform.cpp:1084 Loading catalog for opencpn core.
10:14:43.270 MESSAGE OCPNPlatform.cpp:925 Getting DefaultSystemLocale...
10:14:43.273 MESSAGE OCPNPlatform.cpp:946 Found LanguageInfo for: English
10:14:43.273 MESSAGE comm_drv_signalk_net.cpp:357 Connected to Signal K server version: 1.46.3
10:14:43.735 MESSAGE ocpn_frame.cpp:4739 OnInitTimer...3
10:14:43.735 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 1: enabled=0 start=1700 end=1900

10:14:43.735 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 2: enabled=0 start=2600 end=2800

10:14:43.735 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 3: enabled=0 start=800 end=1000

10:14:43.735 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 4: enabled=0 start=1250 end=1450

10:14:43.735 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 1: enabled=0 start=1700 end=1900

10:14:43.735 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 2: enabled=0 start=2600 end=2800

10:14:43.735 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 3: enabled=0 start=800 end=1000

10:14:43.735 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 4: enabled=0 start=1250 end=1450

10:14:43.891 MESSAGE ocpn_frame.cpp:4739 OnInitTimer...4
10:14:45.807 MESSAGE OCPNPlatform.cpp:823 Starting OpenGL test...
10:14:46.329 MESSAGE OCPNPlatform.cpp:829 OpenGL test complete.
10:14:46.329 MESSAGE OCPNPlatform.cpp:850 OpenGL determined CAPABLE.
10:14:46.345 MESSAGE OCPNPlatform.cpp:823 Starting OpenGL test...
10:14:46.400 MESSAGE OCPNPlatform.cpp:829 OpenGL test complete.
10:14:46.400 MESSAGE OCPNPlatform.cpp:850 OpenGL determined CAPABLE.
10:14:49.867 MESSAGE options.cpp:5348 options: got device count: 1
10:14:51.430 MESSAGE ocpn_frame.cpp:4739 OnInitTimer...5
10:14:51.430 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 1: enabled=0 start=1700 end=1900

10:14:51.430 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 2: enabled=0 start=2600 end=2800

10:14:51.430 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 3: enabled=0 start=800 end=1000

10:14:51.430 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 4: enabled=0 start=1250 end=1450

10:14:51.430 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 1: enabled=0 start=1700 end=1900

10:14:51.430 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 2: enabled=0 start=2600 end=2800

10:14:51.430 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 3: enabled=0 start=800 end=1000

10:14:51.430 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 4: enabled=0 start=1250 end=1450

10:14:51.545 MESSAGE ocpn_frame.cpp:4739 OnInitTimer...6
10:14:51.663 MESSAGE ocpn_frame.cpp:4739 OnInitTimer...7
10:14:51.663 MESSAGE ocpn_frame.cpp:5025 OnInitTimer...Last Call
10:14:51.663 MESSAGE ocpn_frame.cpp:5043 OnInitTimer...Finalize Canvases
10:14:51.888 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:14:51.890 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:14:51.895 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:14:51.898 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:14:52.017 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:14:52.018 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:14:56.149 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 1: enabled=0 start=1700 end=1900

10:14:56.149 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 2: enabled=0 start=2600 end=2800

10:14:56.149 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 3: enabled=0 start=800 end=1000

10:14:56.149 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 4: enabled=0 start=1250 end=1450

10:14:56.154 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 1: enabled=0 start=1700 end=1900

10:14:56.154 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 2: enabled=0 start=2600 end=2800

10:14:56.154 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 3: enabled=0 start=800 end=1000

10:14:56.154 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 4: enabled=0 start=1250 end=1450

10:15:00.257 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:15:00.259 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:15:00.284 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:15:00.286 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:15:00.430 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:15:00.431 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:15:00.455 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:15:00.456 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:15:03.580 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 1: enabled=0 start=1700 end=1900

10:15:03.580 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 2: enabled=0 start=2600 end=2800

10:15:03.580 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 3: enabled=0 start=800 end=1000

10:15:03.580 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 4: enabled=0 start=1250 end=1450

10:15:03.580 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 1: enabled=0 start=1700 end=1900

10:15:03.580 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 2: enabled=0 start=2600 end=2800

10:15:03.580 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 3: enabled=0 start=800 end=1000

10:15:03.581 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 4: enabled=0 start=1250 end=1450

10:15:06.260 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 1: enabled=0 start=1700 end=1900

10:15:06.260 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 2: enabled=0 start=2600 end=2800

10:15:06.260 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 3: enabled=0 start=800 end=1000

10:15:06.260 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 4: enabled=0 start=1250 end=1450

10:15:08.202 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 1: enabled=0 start=1700 end=1900

10:15:08.203 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 2: enabled=0 start=2600 end=2800

10:15:08.203 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 3: enabled=0 start=800 end=1000

10:15:08.203 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 4: enabled=0 start=1250 end=1450

10:15:11.174 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 1: enabled=0 start=1700 end=1900

10:15:11.174 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 2: enabled=0 start=2600 end=2800

10:15:11.174 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 3: enabled=0 start=800 end=1000

10:15:11.174 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 4: enabled=0 start=1250 end=1450

OMITTED redundant Radar messages

10:15:34.979 MESSAGE ocpn_frame.cpp:5641 LOGBOOK: 2024-05-01 19:45:34 UTC GPS Lat -16.07177 Lon -142.36719 COG 347.10681 SOG 0.00 kts
10:15:36.835 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 1: enabled=0 start=1700 end=1900

10:15:36.835 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 2: enabled=0 start=2600 end=2800

10:15:36.835 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 3: enabled=0 start=800 end=1000

10:15:36.835 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 4: enabled=0 start=1250 end=1450

10:15:40.316 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 1: enabled=0 start=1700 end=1900

10:15:40.317 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 2: enabled=0 start=2600 end=2800

10:15:40.317 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 3: enabled=0 start=800 end=1000

10:15:40.317 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 4: enabled=0 start=1250 end=1450

10:15:41.548 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 1: enabled=0 start=1700 end=1900

10:15:41.548 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 2: enabled=0 start=2600 end=2800

10:15:41.548 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 3: enabled=0 start=800 end=1000

10:15:41.548 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 4: enabled=0 start=1250 end=1450

10:15:43.405 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 1: enabled=0 start=1700 end=1900

10:15:43.405 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 2: enabled=0 start=2600 end=2800

10:15:43.405 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 3: enabled=0 start=800 end=1000

10:15:43.405 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 4: enabled=0 start=1250 end=1450

10:15:43.630 MESSAGE NavicoLocate.cpp:310 Located radar IP 10.0.0.7 port 1, interface 10.0.0.6 [128406683/236.6.7.8:6678/236.6.7.9:6679/236.6.7.10:6680]
10:15:43.630 MESSAGE NavicoLocate.cpp:330 Located Navico radar IP 10.0.0.7 port 2, interface 10.0.0.6 [128406683/236.6.7.13:6001/236.6.7.13:6003/236.6.7.14:6002]
10:15:49.792 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 1: enabled=0 start=1700 end=1900

OMITTED redundant radar messages

10:16:44.283 MESSAGE NavicoLocate.cpp:310 Located radar IP 10.0.0.7 port 1, interface 10.0.0.6 [128406683/236.6.7.8:6678/236.6.7.9:6679/236.6.7.10:6680]
10:16:44.301 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 1: enabled=0 start=1700 end=1900

10:16:44.301 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 2: enabled=0 start=2600 end=2800

10:16:44.301 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 3: enabled=0 start=800 end=1000

10:16:44.301 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 4: enabled=0 start=1250 end=1450

10:16:47.323 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 1: enabled=0 start=1700 end=1900

10:16:47.323 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 2: enabled=0 start=2600 end=2800

10:16:47.323 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 3: enabled=0 start=800 end=1000

10:16:47.323 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 4: enabled=0 start=1250 end=1450

10:16:49.424 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 1: enabled=0 start=1700 end=1900

10:16:49.424 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 2: enabled=0 start=2600 end=2800

10:16:49.424 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 3: enabled=0 start=800 end=1000

10:16:49.424 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 4: enabled=0 start=1250 end=1450

10:16:53.061 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 1: enabled=0 start=1700 end=1900

10:16:53.061 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 2: enabled=0 start=2600 end=2800

10:16:53.061 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 3: enabled=0 start=800 end=1000

10:16:53.061 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 4: enabled=0 start=1250 end=1450

10:16:53.084 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:16:53.085 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:16:54.419 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 1: enabled=0 start=1700 end=1900

10:16:54.420 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 2: enabled=0 start=2600 end=2800

10:16:54.420 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 3: enabled=0 start=800 end=1000

10:16:54.420 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 4: enabled=0 start=1250 end=1450


OMITTED redundant radar messages

10:17:12.700 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:17:12.701 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:17:12.722 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:17:12.722 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:17:12.733 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:17:12.735 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:17:12.751 MESSAGE glChartCanvas.cpp:554 BuildFBO 3
10:17:12.752 MESSAGE glChartCanvas.cpp:1009 OpenGL-> Framebuffer OK, size = 2158
10:17:14.102 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 1: enabled=0 start=1700 end=1900

10:17:14.103 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 2: enabled=0 start=2600 end=2800

10:17:14.103 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 3: enabled=0 start=800 end=1000

10:17:14.103 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 4: enabled=0 start=1250 end=1450

10:17:14.103 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 1: enabled=0 start=1700 end=1900

10:17:14.103 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 2: enabled=0 start=2600 end=2800

10:17:14.103 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 3: enabled=0 start=800 end=1000

10:17:14.103 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 4: enabled=0 start=1250 end=1450

OMITTED redundant radar messages. The following are the last 8 lines of file:

10:27:46.248 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 1: enabled=0 start=1700 end=1900

10:27:46.248 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 2: enabled=0 start=2600 end=2800

10:27:46.248 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 3: enabled=0 start=800 end=1000

10:27:46.248 MESSAGE NavicoReceive.cpp:1293 Navico Halo A radar blanking sector 4: enabled=0 start=1250 end=1450

10:27:46.251 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 1: enabled=0 start=1700 end=1900

10:27:46.251 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 2: enabled=0 start=2600 end=2800

10:27:46.251 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 3: enabled=0 start=800 end=1000

10:27:46.251 MESSAGE NavicoReceive.cpp:1293 Navico Halo B radar blanking sector 4: enabled=0 start=1250 end=1450


We would appreciate any troubleshooting advice you may have to offer. I do not speak networking beyond the basics so I am hoping for focused feedback with specific modifications I should try. Thank you for your help.
mkgsail is offline   Reply With Quote
Old 02-05-2024, 13:37   #2
Registered User

Join Date: Nov 2012
Location: Orust Sweden
Boat: Najad 34
Posts: 4,375
Re: OpenCPN crashes when radar is transmitting

One question:
Do you have AIS targets and use radar PPI window and have "AIS/ARPA on PPI" on?
If so try to switch it off and check if for any differences.
Hakan is offline   Reply With Quote
Old 02-05-2024, 18:25   #3
Registered User

Join Date: May 2018
Boat: Voyage 440, 44'
Posts: 18
Re: OpenCPN crashes when radar is transmitting

Thank you for your reply Hakan. Indeed the conditions you outline apply to our use. "AIS/ARPA on PPI" was turned on for radar B. I shut that off and it has been transmitting for 3 hours without crashing! Yeah!

Not sure if active AIS targets are required for the crash. I did not keep a log of the crashes but it seems to me that it may have been stable when we were well offshore and had no AIS contacts.

If this is a bug for which you need more data, let me know and I can try to supply what is required.

Thanks again!
mkgsail is offline   Reply With Quote
Old 03-05-2024, 07:14   #4
Registered User

Join Date: Nov 2012
Location: Orust Sweden
Boat: Najad 34
Posts: 4,375
Re: OpenCPN crashes when radar is transmitting

mkgsail..
Thanks for the report.
Then we kindly ask for your passion to await OCPN v 5.10 or the soon available Beta test. There's this issue solved. There's also a Beta update of radar_pi that will be released in due time. See here if you don't know how to install a Beta plugin.
Hakan is offline   Reply With Quote
Old 03-05-2024, 10:17   #5
Registered User

Join Date: May 2018
Boat: Voyage 440, 44'
Posts: 18
Re: OpenCPN crashes when radar is transmitting

Very good. Thank you Hakan.
mkgsail is offline   Reply With Quote
Old 14-08-2024, 13:24   #6
Registered User

Join Date: Feb 2020
Location: Kiel / Germany
Boat: Jeanneau Sun Odyssey 30i
Posts: 20
Re: OpenCPN crashes when radar is transmitting

Hi there,
I am on Raspberry 4B, Raspbian Bookworm , Flatpak the latest OpenCPN 5.8.4 xxx and Radar Pkugin 5.5.0 (in use witj a Halo 2O) and experience just the same issues. Works for a while and then becomes very slow, unaccesible, looses nav data etc.
It looks like the X-Server becomes very latent before it crashes and I need to power the RasPI off and on again to come back to a chart safe navigation w/o Radar.
Is there any thing a can support witj on order to sort this out?
Cheers
Sixten
Sixten is offline   Reply With Quote
Old 14-08-2024, 14:07   #7
Registered User

Join Date: Nov 2012
Location: Orust Sweden
Boat: Najad 34
Posts: 4,375
Re: OpenCPN crashes when radar is transmitting

Sixten..
And if you follow the advice in post #4 here?
Hakan is offline   Reply With Quote
Old 15-08-2024, 08:34   #8
Registered User

Join Date: Feb 2020
Location: Kiel / Germany
Boat: Jeanneau Sun Odyssey 30i
Posts: 20
Re: OpenCPN crashes when radar is transmitting

Quote:
Originally Posted by Hakan View Post
Sixten..
And if you follow the advice in post #4 here?
Disabling AIS/ARPA in the Radar Plugin will avoid the crashes also on my system :-)
Cheers
Sixten
Sixten is offline   Reply With Quote
Old 15-08-2024, 08:45   #9
Registered User

Join Date: Nov 2012
Location: Orust Sweden
Boat: Najad 34
Posts: 4,375
Re: OpenCPN crashes when radar is transmitting

And when you want use it again please update to OpenCPN 5.10 and the radar plugin v.5.5.4-beta
Håkan
Hakan is offline   Reply With Quote
Old 16-08-2024, 05:35   #10
Registered User

Join Date: Feb 2020
Location: Kiel / Germany
Boat: Jeanneau Sun Odyssey 30i
Posts: 20
Re: OpenCPN crashes when radar is transmitting

Quote:
Originally Posted by Hakan View Post
And when you want use it again please update to OpenCPN 5.10 and the radar plugin v.5.5.4-beta
Håkan
I can confirm that a new Flatpak with OpenCPN 5.10 is available and can be installed, also the Beta Radar 5.5.4 can be installed.

Unfortunately the Flatpak update as well as a new Flatpak installation with uninstalling including data first, will let my installation crash after applying to most Window applies.
Mostly with GTK criticals and GTK warnings being out of range.

Seems I need to wait a bit more.

Thanks for your support!
Sixten is offline   Reply With Quote
Old 16-08-2024, 06:23   #11
Registered User

Join Date: Feb 2020
Location: Kiel / Germany
Boat: Jeanneau Sun Odyssey 30i
Posts: 20
Re: OpenCPN crashes when radar is transmitting

Just found out that this only happens with the X11 Server. With Wayland it seems to work (so no crashes), besides that at least my Dashboard is always centered and Radar PPI is also centered when not being in Dock mode.
Sixten is offline   Reply With Quote
Old 16-08-2024, 11:37   #12
Registered User

Join Date: Feb 2020
Location: Kiel / Germany
Boat: Jeanneau Sun Odyssey 30i
Posts: 20
Re: OpenCPN crashes when radar is transmitting

I am actually sailing now since a few hours on Wayland with OpenCPN 5.10 and Radar 5.5.4beta, PPI in dock mode and transmitting.
AIS/ARPA are enabled.
No crashes of the OpenCPN nor the Radar plugin.
However wayVNC is a nightmare and not usable at all (at least on my setup)
I need to use X11 but then OpenCPN crashes, after closing any Panel/Window.
I keep my fingers crossed to get a solution on that.
Any hints or proposals?
Cheers
Sixten
Sixten is offline   Reply With Quote
Old 17-08-2024, 09:41   #13
Registered User

Join Date: Nov 2012
Location: Orust Sweden
Boat: Najad 34
Posts: 4,375
Re: OpenCPN crashes when radar is transmitting

Sixten..
I'm sorry if my advice led to problems.

My main use is Windows so I've not so much to share on Linux details. I hope someone with more detailed knowledge will come in here.
I though use some RPi's on Bookworm and run X11 due to the Wayland obstacles.
I use the inbound VNC from my Win just now and see none of your problem. No crash but which "panel/window" are you referring to?
If relevant or wise I don't know but to be able to reboot from VNC with no connected display I'd had to set a "Headless resolution" in Preferens->Rpi configuration->Display.
Hakan is offline   Reply With Quote
Old 18-08-2024, 05:57   #14
Registered User

Join Date: Feb 2020
Location: Kiel / Germany
Boat: Jeanneau Sun Odyssey 30i
Posts: 20
Re: OpenCPN crashes when radar is transmitting

I can now confirm following:
If I use the OpenPlotter 4 Headless Image on a Raspi 4B and update according to Sailoogs description to OpenCPN Ubuntu 5.10 I have the describes issues/crashes/nocharts etc. when using Headless only (no HDMI connected) or when having HDMI connected to the second next HDMI port to the USB-C power connector
But when using the HDMI direct next to the power connector everything works as expected!
Thanks you for your great work on the Radar Plugin for my Halo20 and your great support!
Cheers
Sixten
Sixten is offline   Reply With Quote
Old 18-08-2024, 08:50   #15
Registered User

Join Date: Nov 2012
Location: Orust Sweden
Boat: Najad 34
Posts: 4,375
Re: OpenCPN crashes when radar is transmitting

Sixten..
Yes I saw the same from Vagspel. Also on some Raspberry wiki it's mentioned that one should use HDMI-1 if only one is used.

I also learned today that if the radar scanner IP-connection is directly used, without router-switch, on a Debian 12, BookWorm, and the like, e.g. Ubuntu 22.04 you must not use DHCP for eth0 but a manual address like 169.254/16 (e.g. 169.254.254.1 Netmask: 16
See more here in the wiki
Hakan is offline   Reply With Quote
Reply

Tags
enc, opencpn, radar

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
B & G Radar stopped Transmitting Gripfast Navigation 10 08-05-2023 06:37
OpenCPN 5.6.0: Dashboard Plugin crashes OpenCPN Thonglor OpenCPN 5 10-02-2023 11:39
Does having my radar transmitting make me more visible to others with radar? Peregrine1983 Marine Electronics 38 04-08-2017 21:48
M802 SSB not transmitting nelson.peter Marine Electronics 15 26-02-2015 20:42
SSB Not Transmitting nelson.peter Marine Electronics 19 26-05-2009 08:51

Advertise Here


All times are GMT -7. The time now is 23:07.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.