Open CPN version 5 and CAMINO-108

[rgleason]

http://www.alltekmarine.com/products...?bgid=2&gid=41

I see specs for 9600 baud rate.
Makes me wonder, Vesper baud rate is considerably faster.

[Barbaria]

Specs for the 108 says "Baud rate configurable (default 38,400 bps)"

[Navitaa]

Hi!

I have the same problem with my Camino 108w, USB stop working under OpenCPN v.5. Rolling back to v.4 and everything work again.

Btw, new firmware is released for the unit that fixes N2K target problem.

[Moo]

Originally Posted by Barbaria

Her it is. Two from Ver. 5.0 and two of the Ver 4.8.

What is that filter on the 4.8 version... Something strange there as it doesn't show in the configuration panel?

[siff]

I have the same problem with my camino 108S and windows 10, connecting with the usb output of the AIS.
So I tried with Ubuntu. It worked successfully after some tweakings which were given directly by the hints of opencpn.

[siff]

If the connexion was made via the usb output of the Camino, the speed you put is meaningless, it is an USB/USB virtual serial port.