Hi, When using a
route (in OpenCPN) I would like to sent the
route information like bearing, VMG, distance to next, COG, SOG from
OpenCPN to an external display via the NMEA0183
network.
In my case the Windows PC is connected via USB to a ShipModul Miniplex 2 USB, which is the concentration point for
Seatalk (incl
Raymarine ST6001 autopilot),
AIS and NASA Yacht repeater.
My
GPS is a receiver only, it does not have waypoint or route information.
To feed the NASA Yacht repeater I need the output from
OpenCPN.
Can anyone tell if it is possible to sent these data from OpenCPN into the
network?
Thanks in advance
Martijn
The Netherlands