Hi, When using a route
(in OpenCPN) I would like to sent the route
information like bearing, VMG, distance to next, COG, SOG from OpenCPN
to an external display via the NMEA0183 network.
In my case the Windows PC is connected via USB to a ShipModul Miniplex 2 USB, which is the concentration point for Seatalk
ST6001 autopilot), AIS
and NASA Yacht repeater.
is a receiver only, it does not have waypoint or route information.
To feed the NASA Yacht repeater I need the output from OpenCPN
Can anyone tell if it is possible to sent these data from OpenCPN into the network?
Thanks in advance