Current Arrows

[P_Dub]

In the last version ( 2.4.412 ) the current arrows are way too large, it should be made with a feature so that you can adjust the size to one suited. It would be appreciated. Also, it seems that the quilting has been change and does not operate so well with the S-57. Furthermore, I am renewing my request for scaling the boat, it would be appreciated.
Thanks for this tremendous piece of work.
Regards.

[HappySeagull]

Originally Posted by P_Dub

In the last version ( 2.4.412 ) the current arrows are way too large, it should be made with a feature so that you can adjust the size to one suited. It would be appreciated. Also, it seems that the quilting has been change and does not operate so well with the S-57. Furthermore, I am renewing my request for scaling the boat, it would be appreciated.
Thanks for this tremendous piece of work.
Regards.

Yikes!Good point!


P_Dub,have you tried to make a small "ownship" per
Routes and Marks | Official OpenCPN Homepage
? I have made a couple with varied success and someone else posted one too....not "scalable" but they do the trick.

[janp391]

Originally Posted by P_Dub

In the last version ( 2.4.412 ) the current arrows are way too large, it should be made with a feature so that you can adjust the size to one suited. It would be appreciated. Also, it seems that the quilting has been change and does not operate so well with the S-57. Furthermore, I am renewing my request for scaling the boat, it would be appreciated.
Thanks for this tremendous piece of work.
Regards.

I see no current arrows at all, in European water. Tidal heights is ok.
Running XP SP3 and 2.4.412

[bdbcat]

P_Dub....

Can you be more specific about S57 quilting issues? What are the changes that you notice? Screenshots?

Thanks
Dave

[P_Dub]

Originally Posted by bdbcat

P_Dub....

Can you be more specific about S57 quilting issues? What are the changes that you notice? Screenshots?

Thanks
Dave

Charts are opening one at a time and only when you reach the next one is opening thus not providing a continuous chart. It could be misleadig. The quilting is being check.
Regards.

[bdbcat]

P_Dub....

What chart set? What lat/lon?

Thanks
Dave

[P_Dub]

bdbcat
Here I am including what you have requested. All the change over from one chart to another is doing the same, the quilting is check.
Regards

[bdbcat]

P-Dub...

Sorry, nothing seen attached...

Dave

[P_Dub]

Originally Posted by bdbcat

P-Dub...

Sorry, nothing seen attached...

Dave

Send me an email, it seems that it is not passing.
pierdube*at*videotron*dot*ca
It will be easier for me.
Regards.

[cagney]

Originally Posted by P_Dub

In the last version ( 2.4.412 ) the current arrows are way too large, it should be made with a feature so that you can adjust the size to one suited. It would be appreciated. Also, it seems that the quilting has been change and does not operate so well with the S-57. Furthermore, I am renewing my request for scaling the boat, it would be appreciated.
Thanks for this tremendous piece of work.
Regards.

I can't find any problem with quilting S57 vector charts.
But it seems like SCAMIN is not working, consider the dump below. SCAMIN is ticked.



Thomas