Got 2 com
ports coming to
opencpn. one from
AIS transponder, another from
VHF AIS.
I don' t want to remove the ais/vhs link as the
antenna is receiving perfectly long distance AIS targets. AIS transponder is connected on a lower
antenna.
on
OPENCPN I can see my own AIS trace Under my
boat icon.
unfortunatly, the CPA
alarm is effective as a proximity alert is detected.
I understand that there is probably a protocol error in the
VHF firmware, bur i cannot correct the problem on this
Equipment. VHF is sending AIVDM instead of AIVDO for its proper identification.
Is there a way to filter my own mmsi in order to avoid my own ais position to be displayed?