4.6 Vector Chart Display Problem

[Sail323]

When I upgraded to 4.6.x from 4.4.0, I noticed that "Chart Information Objects" are constantly displayed on vector charts even if the box is not checked in the "Vector Chart Display" menu. This happens in both 4.6.0 and 4.4.1. The only way I found to prevent this is to downgrade to 4.4.0.

[Sail323]

[cagney]

Originally Posted by Sail323

When I upgraded to 4.6.x from 4.4.0, I noticed that "Chart Information Objects" are constantly displayed on vector charts even if the box is not checked in the "Vector Chart Display" menu. This happens in both 4.6.0 and 4.4.1. The only way I found to prevent this is to downgrade to 4.4.0.

It's all have to do with your setting in Options->Charts-Vector Charts Display

You're using "Mariners Standard", and have somehow pressed "Select All", and that is what you get. If you press "Reset to STANDARD" your problem will be solved and O will work as you expect.

Personally I don't use "Mariners Standard", as all scenarios I normally uses are covered by Display Category "All" + the built in shortcut filters.

Thomas