Cruisers Forum
 


Join CruisersForum Today

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 12-07-2020, 16:00   #1
Registered User
 
Padastty's Avatar

Join Date: May 2017
Location: Atlanta area, Georgia
Posts: 9
Battery Monitor Mystery

I have an EMON battery monitor. While connected to shore power the the volts reading is pretty steady but the AMPS remaining will continue to drop over time. It seems as if it has to cycle in order to reset back to full AMPS. This seems counter intuitive...I would expect the AMP HOURS to remain full at 200. Obviously this creates concern when off shore power for a period as even with solar, wind and running the engines doesn't ever seem to bring the AMP HOURS back up but the VOLTS will go up to low 13 range. Then when reconnected to shore power the VOLTS do go up to the high 13 low 14 range and eventually the AMP HOURS reset to full and then start to decline again over time. Any insight would be appreciated.
Padastty is offline   Reply With Quote
Old 12-07-2020, 16:20   #2
Registered User

Join Date: Jan 2019
Location: Vancouver B.C.Canada
Boat: Macgregor 26S
Posts: 289
Images: 1
Send a message via MSN to BugzyCan
Re: Battery Monitor Mystery

How many batteries in the pool? Could you have one that is dying? A battery will often charge up to full, but have no strength CCH after if there is a cracked cell in it.
You could try removing each battery one at a time and see if the Amps stay up, then just swap out that one battery. If after swapping each battery out and you find nothing, then I would think it is a problem with your EMON battery monitor.
Note: I am NO expert on this, just throwing out some ideas.
BugzyCan is offline   Reply With Quote
Old 12-07-2020, 16:23   #3
Do… or do not
 
s/v Jedi's Avatar

Cruisers Forum Supporter

Join Date: Feb 2009
Location: in paradise
Boat: Sundeer 64
Posts: 10,944
Re: Battery Monitor Mystery

It sounds like the negative from the battery charger is connected to the negative of the battery. This is wrong. The only thing that may be connected tobattery negative is the shunt of the battery monitor; everything else must be connected to the other side of the shunt.
s/v Jedi is online now   Reply With Quote
Reply

Tags
battery, monitor

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding 2nd battery monitor ti an existing Beneteau monitor Handsoff Marine Electronics 14 15-04-2020 08:32
What fuse between battery/battery monitor Orchidius Electrical: Batteries, Generators & Solar 1 27-06-2014 04:38
Link 10 Battery Monitor ssullivan Product or Service Reviews & Evaluations 76 07-02-2014 06:18
Link 10 Battery Monitor -Setting Battery Capacity hugh c Electrical: Batteries, Generators & Solar 3 02-05-2012 11:57
Battery Monitor rleslie Electrical: Batteries, Generators & Solar 3 31-08-2005 01:31

Advertise Here


All times are GMT -7. The time now is 18:48.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.