The
radio came with a connector kit but it has been moved a few times and the connector didn't make it through the last move. The
radio and tuner are mounted in the
boat now and I am short one connector to finish the job.
The M-710 has two pigtails coming off the back of the radio, one for
power and one for the tuner. I have the four conductor shielded wire run from the AT130 tuner but need the end to
plug into the M-710 pigtail.
I called
ICOM and they have no idea...they told me to look at Amazon and match it up by picture. This is a very disappointing response. I had expected more from a technical company.
Amazon does sell the four in-line tuner connector but I can't find the 2x2 M710 connector.
The connector on my radio marked up for reference. I need the connector half that plugs into this one.
I know this radio is on the old side but it still is a workhorse and a great radio. At this point, I am hoping to figure out the Molex part number and I'll buy the connector directly from Molex if they still make it.
Alternatively, I will have to cut the pigtail and add a different connector. I'd like to keep it standard though.
Linear Mode
Recent Discussions