New to cruisers forums
so I Hope this is the right place for this question and thanks in advance for any help anyone can give!
I have a set of VDO instruments near the helm
and they are not currently plugged into anything coming from the top of the mast
. There is an anemometer (is that what you call it) at the top of the mast
and some wires that I have found that clearly come from the top and appear to be for the anemometer, a black wire with wires inside it, red, white, blue and a shield. In addition to the black wire there is also a log + and - and wind
+ and - this makes a total of 8 wires. It is possible that these wires are from a different system and possibly not VDO brand, might have to go up the mast. What I want to know is what type of plug
do I need to plug
these wires into the wind
instruments and what would the Pin out be for this plug?