Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 03-07-2008, 19:13   #1
Registered User

Join Date: May 2008
Location: SW Florida
Boat: Bristol (Alden) 35 Sloop "Zephyr"
Posts: 508
Images: 2
Testing a depth sounder on the hard?

Is there a simple way to test a depth sounder while the boat is on the hard. I picked up a like new Standard depth sounder head unit to replace my old one, and want to test it while the boat is on the hard.
Any suggestions?
Someone told me you should be able to hear the transducer clicking?
over40pirate is offline   Reply With Quote
Old 03-07-2008, 20:41   #2
Registered User
 
windthief's Avatar

Join Date: Feb 2005
Location: Shelter Island A-1 Mooring
Boat: Islander Freeport 41 1976
Posts: 113
Images: 91
Send a message via Yahoo to windthief
That's right

I know that the AIRMAR transdicers have a clicking noise. You have to get your ear right up to the transducer. Other than that I don't think there is.
__________________
Brad D.
S.V. Big Tuna
WWW.svbigtuna.COM
windthief is offline   Reply With Quote
Old 03-07-2008, 20:41   #3
Registered User
 
Lancerbye's Avatar

Join Date: Mar 2007
Location: Cormorant Island, BC, Canada
Boat: Lancer 44 Motorsailer
Posts: 1,877
Images: 38
Yes you should be able to hear it ticking or feel the pulse if it is powerful enough. Using a hard surface up very close to it will show you a depth and will vary as you change it slightly. The echo through air is very different in speed than that in water so this is not a calibration procedure but will indicate a change in depth as you move the plate a little. I have used this proving method on fairly strong sounders, don't know if a small low powered unit would have enough strenght to do this.
__________________
The basis of accomplishment is in never quitting
Mengzi Meng-tse
Lancerbye is offline   Reply With Quote
Old 03-07-2008, 21:43   #4
Moderator Emeritus
 
David M's Avatar

Cruisers Forum Supporter

Join Date: Sep 2007
Location: Eastern Tennessee
Boat: Research vessel for a university, retired now.
Posts: 10,406
Because you can hear it ticking does not necessarily mean that it is working. There are a few other things that need to work in addition to its ability to make a sound pulse.
__________________
David

Life begins where land ends.
David M is offline   Reply With Quote
Old 04-07-2008, 00:40   #5
Senior Cruiser
 
Alan Wheeler's Avatar

Cruisers Forum Supporter

Join Date: Dec 2003
Location: Marlborough Sounds. New Zealand
Boat: Hartley Tahitian 45ft. Leisure Lady
Posts: 8,038
Images: 102
Correct!
Plus, NEVER put your ear up to it. The sound is way beyond your hearing range, but can still do damage close up. You can't hear anything apart from the click, but it sure can hurt.
It is not a good idea to run a transducer out of water. The powerful ones that have fishfinder ability, can actually crack the casing.
__________________
Wheels

For God so loved the world..........He didn't send a committee.
Alan Wheeler is offline   Reply With Quote
Old 05-07-2008, 11:13   #6
Registered User
 
Bert's Avatar

Join Date: Jul 2008
Location: La Paz, Mexico
Boat: looking for catamaran 40-50ft
Posts: 11
Images: 4
Send a message via Yahoo to Bert
Hi! In the installation instructions of airmar you can find some hints about testing. I recommend strongly to reduce the transmission power of your system to minimum or use a testing tool for transducers because they are working with a low energy impulse. Furuno gives in its technical documentation some circuit layout for testing transducers, but you need a scope and I have to look for the document myself.
__________________
Regards
Bert
---------------------------------------
https://nautical-electronics.com
Bert is offline   Reply With Quote
Old 05-07-2008, 15:29   #7
Registered User

Join Date: May 2008
Location: SW Florida
Boat: Bristol (Alden) 35 Sloop "Zephyr"
Posts: 508
Images: 2
I don't need to test the transducer, just the head.
Maybe I'll cut an old trash can to the shape of the hull and set it on blocks so its is flush with the hull and tape it to the hiull, then fill it with water, for a quick test.

I bought the replacement one from a used equipment dealer, and have about 3 more weeks to return it if it doesn't work.

Thanks folks
over40pirate is offline   Reply With Quote
Old 05-07-2008, 18:55   #8
Registered User
 
seafox's Avatar

Join Date: Jul 2005
Location: new zealand
Boat: Lotus 10.6
Posts: 1,270
Images: 26
If you do hold your head up to it, only do it for a few clicks. You lose 1 IQ per click.
A guy in our marina tried it for too long and ended up forgetting what he was doing!



Quote:
Originally Posted by Alan Wheeler View Post
Correct!
Plus, NEVER put your ear up to it. The sound is way beyond your hearing range, but can still do damage close up. You can't hear anything apart from the click, but it sure can hurt.
It is not a good idea to run a transducer out of water. The powerful ones that have fishfinder ability, can actually crack the casing.
__________________
"Very well, you hand it over and we'll put your town to our rudder and ne'er return" Captain Barbossa, Black Pearl, Pirates of the Caribbean.
seafox is offline   Reply With Quote
Old 05-07-2008, 22:14   #9
Registered User

Join Date: Jun 2008
Boat: Designing a global explorer (full keel & steel)
Posts: 353
Quote:
Originally Posted by seafox View Post
If you do hold your head up to it, only do it for a few clicks. You lose 1 IQ per click.
A guy in our marina tried it for too long and ended up forgetting what he was doing!
Did you need to take an aspirin after that event - Mr Sea-foxy-man?
exfishnz is offline   Reply With Quote
Old 05-07-2008, 23:49   #10
Senior Cruiser
 
Alan Wheeler's Avatar

Cruisers Forum Supporter

Join Date: Dec 2003
Location: Marlborough Sounds. New Zealand
Boat: Hartley Tahitian 45ft. Leisure Lady
Posts: 8,038
Images: 102
Quote:
A guy in our marina tried it for too long and ended up forgetting what he was doing!
Hmmm, wonder if I once got to close to my transducer???
Now, what was I do....oh yeah push this button
__________________
Wheels

For God so loved the world..........He didn't send a committee.
Alan Wheeler is offline   Reply With Quote
Old 06-07-2008, 00:45   #11
Registered User
 
Lancerbye's Avatar

Join Date: Mar 2007
Location: Cormorant Island, BC, Canada
Boat: Lancer 44 Motorsailer
Posts: 1,877
Images: 38
I heard it was good for removing wax in your ears. So what's a little forgetfulness, it has it's upside. Every story you hear become a new one. LOL
__________________
The basis of accomplishment is in never quitting
Mengzi Meng-tse
Lancerbye is offline   Reply With Quote
Old 06-07-2008, 08:45   #12
Registered User

Join Date: Apr 2007
Posts: 718
Quote:
Originally Posted by over40pirate View Post
Maybe I'll cut an old trash can to the shape of the hull and set it on blocks so its is flush with the hull and tape it to the hiull, then fill it with water, for a quick test.
In my shop, I use a 10' length of pvc pipe with a cap on one end, standing straight up and filled with water. A B&G transducer, made by Airmar, works just fine sitting in the top of the pipe with the bottom resting on a cement floor. I have a tee with a screw cap on it near the bottom for draining if necessary. Iv'e never tried this on a boat on the hard, but don't see why it wouldn't work as long as you can get the water level up against the transducer.

Eric
fairbank56 is offline   Reply With Quote
Old 06-07-2008, 09:48   #13
Registered User

Join Date: May 2008
Location: SW Florida
Boat: Bristol (Alden) 35 Sloop "Zephyr"
Posts: 508
Images: 2
Fairbank56, Thanks for that idea. I will try it. What diameter pvc pipe do you use? I think I hava length of 4 or 6 inch behind the barn.
over40pirate is offline   Reply With Quote
Old 06-07-2008, 12:50   #14
Senior Cruiser
 
Alan Wheeler's Avatar

Cruisers Forum Supporter

Join Date: Dec 2003
Location: Marlborough Sounds. New Zealand
Boat: Hartley Tahitian 45ft. Leisure Lady
Posts: 8,038
Images: 102
Quote:
I heard it was good for removing wax in your ears.
It's the removing by blowing it out the other ear that I am concerned with.
__________________
Wheels

For God so loved the world..........He didn't send a committee.
Alan Wheeler is offline   Reply With Quote
Old 06-07-2008, 14:28   #15
Registered User
 
Vasco's Avatar

Join Date: Apr 2004
Location: Toronto
Boat: CS36Merlin, "La Belle Aurore"
Posts: 7,557
Just hold a radio on the am band next to it, you'll hear the ticking (if it's working).
__________________
Rick I
Toronto in summer, Bahamas in winter.
Vasco is offline   Reply With Quote
Reply

Tags
depth sounder, on the hard

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sonar Depth Sounder? paula Marine Electronics 3 29-08-2007 02:22
Depth Sounder Installation Steve Kidson Marine Electronics 1 12-06-2006 04:25
Depth Sounder Thru-Hull Alternative? markpj23 Marine Electronics 17 16-05-2006 22:34
Depth Sounder Troubleshooting exposure Construction, Maintenance & Refit 9 10-02-2004 14:47

Advertise Here


All times are GMT -7. The time now is 09:24.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.