because I could not find an answer through searches. I do see a lot of discussion on the topic .
I want to set an active waypoint on either my Garmin
Echomap 73sv plus or Raspberry Pi (OpenPlotter buld, OpenCPN
or qtVlm) and have the active waypoint appear on the other device to show distance, bearing, time to go, etc.
My setup: Nmea 2000
(SeatalkNG) network with Garmin
Echmap 73sv plus chartplotter
, i70s display, ev100 wheel
pilot with i70p display, Raspberry connected via YachtD YDWG-02 Nmea 2000
wireless gateway, Em-trak 953 AIS
I'm getting depth
, speed and ais
data on all devices as expected. I can set a waypoint on the Garmin and the autopilot
will steer to it. I can set a waypoint on the Raspberry Pi (OpenCPN or qtVlm) and the i70s shows distance and bearing data.
What am I missing? Nmea
2000 setup was essentially plug
I also have a Digital Yacht USB/Nmea 0183 adapter I can use to interface chartplotter
and Pi if the issue is a Nmea
0183/2000 translation issue.
Thanks in advance for your help!