We currently have the following set up:
C80 MFD Chart plotter, and connected to is we have Autopilot
(ST6002) and Depth
gauges (St60+) all hooked up with Seatalk
, not seatalk2)
We also have AIS
wired in via NMEA
1830 to the C80 MFD Chart plotter.
All this is working great and we are happy. but what I would love to do is set up a Wifi
gateway to get all this data on a tablet too.
The C80 MFS has a Seatalk2 (SeaTalkNG) port which current
has nothing at all plugged into it.
Does this mean I can buy a Seatalk2 wifi
gateway and see all my transducers (wind, depth
?) and also AIS
data by simply plugging that in?
Or is the SeaTalk2 port on the C80 MFD chart plotters an "input data" only?