Raymarine ST60 parts needed

[garthaway]

Hi, I have a Raymarine ST60 transducer. My wind vane was taken off by a kite getting tangled with my mast.
I purchased a new wind vane, but on closer inspection, there's a part missing that the wind vane attaches to.
The anemometer sits mounted just below and that still works fine!
Please help, I can't find a diagram or anything for the part I need!
Thanks.

[GordMay]

Greetings and welcome aboard the CF, garthaway.
ST-60 Wind Transducers
➥ https://www.jgtech.com/pdf/60trans.pdf
➥ http://www.olajedatos.com/documentos/60trans.pdf

[garthaway]

Thanks very much! Really appreciate the help. Any idea where I can order from?

Mine is slightly different, I guess it's the ST60+.

But it's the upper wind vane pod that is missing from mine then.

[Brickwede]

Hello Gataway,
yes it is a ST60+.
What you miss is the bearing package for the windvane. Did you open the windtransducer? All staff inside available? I fear the mangetic part inside is also missing. If you able to read german, I'll send you a repair Manual, written by my self.
Now the bad News. You didn`t get it as a spare part from Raymarine, only with the upper or lower Cup. The good thing is, both bearing packages are the same. But the magnetic knob is not included . The order number for the upper Cup, the bearing and O-Ring is A28168 and it cost 144€ in Germany.
Best regards
Jochen

[garthaway]

Hi Jochen.

Thanks very much, I really appreciate it.
Ja bitte, Ich kann deutsch sprachen!

Regards.