I have a 10 year old Quick CHC1202M.
It has an unusual fault and I wonder if anyone has a good suggestion or known repair. (They are $663 at Island water
world, so I'm sufficiently motivated). Of course, replacement is Quick's suggestion.
When connected to the windlass
and powered, it jams the system and causes the windlass
to continuously go up.
After isolating, I discover it is only the CHC1202 at fault.
I have stripped the CHC to circuit board level. No obvious flaws. Tested with multimedia across the button component and it is not stuck on. However the LED below "up" is lit up (which displays when the controller is pulling up the anchor).
No other buttons function.
I've tried replacing the battery
(no avail) and can find no way of forcing a hard restart.
Any suggestions greatly accepted.