Cruisers Forum

Join CruisersForum Today

  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
Thread Tools Search this Thread Rate Thread Display Modes
Old 10-11-2013, 22:31   #1
Registered User
Reefmagnet's Avatar

Join Date: May 2008
Location: puɐןsuǝǝnb 'ʎɐʞɔɐɯ
Boat: Nantucket Island 33
Posts: 3,885
Navico WD 200 to Simrad IS20 wind instrument upgrade question

I'm looking at upgrading the totally non-functional Navico WD200 wind instrument on our new to us boat with a Simrad IS20 system. I've looked at the wires coming down the mast from the old wind transducer and the cable has 4 wires and I'm unsure if it has a foil shield (probably not). It's impractical at the moment to feed a new IS20 cable (Simnet) down the mast, although at some time in the future this will be possible. In the meantime, I'm considering either joining to the the existing cable to connect to the IS20 wind instrument via standard Simnet or, if this is not likely to work, getting an NMEA0183 wind transducer and connecting this to the NMEA port of the wind instrument.

Anyone know if the above is possible, or other recommendations? Cheers.
Reefmagnet is offline   Reply With Quote

men, navico, rum, simrad, wind

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Advertise Here

All times are GMT -7. The time now is 04:43.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.