I recently acquired an Airmar PB200 weatherstation. After getting it up on the masthead, running nmea2000 cabling, etc. I hooked it up to my E7 temporarily (open twisted splices - very temporary) It worked great, gave me the data.
After neatly re-running the cabling, installing proper field-installable connectors, etc., I'm not getting wind
data. The E7 sees the pb200 as a device, sees hex strings coming from it, etc, but no joy on getting wind
. Big bummer.
One clue - when the E7 discovers the PB200 as a device, sometimes it has it's can bus address and various details, and sometimes it doesn't.
Is it possible the terminator failed or some such like that? Anything I can try?