Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 15-08-2022, 04:16   #1
Registered User
 
PassportJoy's Avatar

Join Date: Mar 2014
Location: San Diego
Boat: Passport 43
Posts: 34
M802 not tuning

M802 stopped tuning while sailing the west coast of Mexico. I have refreshed the counterpoise, replaced the gto15 wire, refreshed backstay attachment, ran new coax from radio to the tuner, installed new at140 tuner, verified voltage through tuner control cable, verified continuity of green and white wires on tuner control cable. Still have high SWR. Bypassed the at140 tuner with manual tuner and cross needles and the 802 can transmit 50W on mid power with 1 to 1.1 SWR.
Help!
PassportJoy is offline   Reply With Quote
Old 15-08-2022, 05:08   #2
Registered User

Join Date: Apr 2012
Posts: 118
Re: M802 not tuning

Wow…you do have a puzzle. Since you confirmed power out of 802 I would concentrate on the at140…since you put in a new at140 first I would look at the control cable, clean connections.
Second check 802 for correct tune signal ie., key & start voltage
Ref at140 manual PG 11

Good luck
Capt Jack
W4GRJ
Attached Thumbnails
Click image for larger version

Name:	7CCC399D-6B35-4076-B672-A45BEDD91246.jpg
Views:	25
Size:	398.7 KB
ID:	262888  
BocaIII is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Icom AT-140 tuner with M802 HF radio (SSB) stopped tuning Daurin Marine Electronics 45 15-01-2022 08:20
Help with IC-M802 cloning software CS-M802 #11 Mimmo Marine Electronics 0 18-03-2018 14:12
Icom ah-4 tuner not tuning FSmith Marine Electronics 2 27-04-2016 09:09
Rig Maintenance & Tuning GordMay Construction, Maintenance & Refit 7 02-04-2012 10:58
ICOM M802 Tuning Problem svcattales Marine Electronics 13 17-01-2009 17:51

Advertise Here


All times are GMT -7. The time now is 21:39.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.