I've got an
Beneteau Oceanis 40 with
Raymarine Tridata (ST60) sensors and a CW80 MFD. Recently I've added a
B&G Triton2 and it's showing most of the data. It won't however show the
AutoPilot info, and I want it to. I also want to be able to control the AP from the
b&G Vulcan 12" that I'm planning to install.
My plan is now to capture the
Raymarine communication PGNs and convert them to
Simrad AP44
Autopilot Controller messages and by doing so fooling the B&G MFD and Triton2 into thinking 'it's one of them'.
Does anyone here have a
Simrad AP44 Autopilot Controller with a B&G MFD or Triton2 who's able to capture some N2K traffic? Preferably during boot and then pressing the standby/auto/wind/+-10/+-1 buttons.
Cheers,
hans