I've got an Beneteau Oceanis
40 with Raymarine
Tridata (ST60) sensors and a CW80 MFD. Recently I've added a B&G Triton2 and it's showing most of the data. It won't however show the AutoPilot
info, and I want it to. I also want to be able to control the AP from the b&G Vulcan 12" that I'm planning to install.
My plan is now to capture the Raymarine
communication PGNs and convert them to Simrad
Controller messages and by doing so fooling the B&G MFD and Triton2 into thinking 'it's one of them'.
Does anyone here have a Simrad
AP44 Autopilot Controller with a B&G MFD or Triton2 who's able to capture some N2K traffic? Preferably during boot and then pressing the standby/auto/wind/+-10/+-1 buttons.