Is this a ram swing arm? Is it still made?

[Sailmonkey]

Originally Posted by northwestsailor

I have one that I would be willing to sell if you want one. It looks like the ones at the bottom.

If you mean like the latter posts with the sand cast arm, I just went to WM and physically touched one. It's nice, but too bulky for my purposes.

Looks like I'm going down the fabrication path.


Sent from my iPhone using Cruisers Sailing Forum

[Roy M]

You can also make one out of plywood or composites.

[northwestsailor]

It is like the one in the first photo of this post. It is very heavy duty and nicely polished unit but definitely not cast.

[Sailmonkey]

Originally Posted by northwestsailor

It is like the one in the first photo of this post. It is very heavy duty and nicely polished unit but definitely not cast.

I'll PM you....


Sent from my iPhone using Cruisers Sailing Forum

[River Cruiser]

I have one like that I'am not using, had my radar on it and then went to a 12" mfd. it needs a tack weld re-done, a simple 5 minute fix for a shop with a heliarc welder. I had it at my lower helm and liked it because the display could be swung around out of the way when not needed. Not sure I want to get rid of it, I'll have to decide whether I'am going to use it or not as I'am in the middle of upgrading electronics and really haven't thought how I'am going on the upper helm.


Sent from my iPad using Cruisers Sailing Forum