Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 21-06-2021, 03:12   #46
Registered User

Join Date: Nov 2012
Location: Mediterranean
Boat: Bavaria 44' 2002
Posts: 8
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

Quote:
Originally Posted by lateral View Post
Anybody have download URL for updated Firmware? re Tx frequency offset.
It is not included in HA-102-CD.rar, which has everything else.
Thanks.
Having same issues here - would really appreciate any info on firmware update. Very frustrating dealing with the manufacturer - was send some file which only a technician would understand and involves connecting jump cables to one of the electronic parts inside the AIS - dont want to go that way and am sure a firmware update should be a lot simpler. Any help appreciated. Thanks in advance
markram is offline   Reply With Quote
Old 17-07-2021, 12:11   #47
Registered User

Join Date: Apr 2021
Location: Victoria, BC
Boat: 1979 Californian 34
Posts: 4
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

Well, I connected and ran my MATSUTEC HA-102. Shortly after I turned it on the local harbour patrol boat showed up and said that he had a MOB signal coming from my slip. The MMSI number was a Search And Rescue number (SART). I finally received an MMSI number associated with my VHF radio. Now, how do I program the MATSUTEC HA-102 with my new MMSI number?
OnTheSea60 is offline   Reply With Quote
Old 17-07-2021, 12:13   #48
Registered User
 
Simi 60's Avatar

Join Date: Jun 2016
Location: Australia
Boat: Milkraft 60 ex trawler
Posts: 4,651
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

Quote:
Originally Posted by OnTheSea60 View Post
. Now, how do I program the MATSUTEC HA-102 with my new MMSI number?
What did the manual tell you?
Simi 60 is offline   Reply With Quote
Old 17-07-2021, 14:38   #49
Registered User
 
lateral's Avatar

Join Date: Apr 2011
Location: NZ
Boat: S34 Bob Stewart - 1959 Patiki class. Re--built by me & good mate.
Posts: 1,126
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

Depending if the the ha102 has a db9 port you need either a db9 to db9 female/female or just one and a pigtail and wire to ha102 data cable, then use the utility program.
Or, if you only have USB then get a USB to db9 . And driver.
Ha102 rar CD available here.
Download_Matsutec Brand absorbed Sailing Yacht and Marine electronics

Pretty straight forward. Mine had no db9 rs332 port so had to use a db9 terminal block.
lateral is offline   Reply With Quote
Old 17-07-2021, 15:00   #50
Registered User
 
lateral's Avatar

Join Date: Apr 2011
Location: NZ
Boat: S34 Bob Stewart - 1959 Patiki class. Re--built by me & good mate.
Posts: 1,126
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

I was told that once programmmed you had to have a factory reset but I don’t think this is the case with the ha102.
Hence no international acceptance stamp.
Factory reset= go back to factory.
Not user doable type.
I changed mine.
lateral is offline   Reply With Quote
Old 17-07-2021, 15:45   #51
Registered User

Join Date: Sep 2019
Location: Lifeaboard
Boat: FP Lavezzi 40
Posts: 4,013
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

Quote:
Originally Posted by lateral View Post
I was told that once programmmed you had to have a factory reset but I don’t think this is the case with the ha102.
Hence no international acceptance stamp.
Factory reset= go back to factory.
Not user doable type.
I changed mine.
You can program your MMSI as many times as you want to. This is no proretary device from raymarine, B&G etc where they use this excuse "Security" to simply make money and make it as uncomfortable and time consuming so you buy their newest device instead. Went through that nightmare with raymarine VHF and out of principal set it tnrough, 2 weeks and 120Euro fee+shipping for simply change a number...

And HA102 has an official and registered CE certification, the German officials from "Bundesnetzagentur" checked mine, all ok. Which means it has an international acceptance too.
CaptainRivet is offline   Reply With Quote
Old 17-07-2021, 16:01   #52
Registered User
 
lateral's Avatar

Join Date: Apr 2011
Location: NZ
Boat: S34 Bob Stewart - 1959 Patiki class. Re--built by me & good mate.
Posts: 1,126
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

Quote:
Originally Posted by CaptainRivet View Post
You can program your MMSI as many times as you want to. This is no proretary device from raymarine, B&G etc where they use this excuse "Security" to simply make money and make it as uncomfortable and time consuming so you buy their newest device instead. Went through that nightmare with raymarine VHF and out of principal set it tnrough, 2 weeks and 120Euro fee+shipping for simply change a number...

And HA102 has an official and registered CE certification, the German officials from "Bundesnetzagentur" checked mine, all ok. Which means it has an international acceptance too.
Good info to know.
Thread drift , but ....
I not going to install my Matsutec as I also have a Halo+ radar that gathering dust and I think I would prefer that on my puny 9" B&G plotter rather than have the clutter of AIS targets obliterating my screen.
I have a Standard horizon VHF AIS receive only that i hooked up to the plotter
(only been in the boat 5yrs!) last night and was horrified with the mess on my screen. Guess I could hook it to my toughbook.
Its value would be realized in open sea when there are way less targets but prefer higher a situation awareness product given the choice. Especially with the number of non-AIS vessels out there. Although I'm picking it will become mandatory for international cruising in the near future. As in covid ravaged Fiji at the moment.
Happy to be shown the error of my thinking.
lateral is offline   Reply With Quote
Old 18-07-2021, 01:50   #53
Nearly an old salt
 
goboatingnow's Avatar

Join Date: Jun 2009
Location: Lefkas Marina ,Greece
Boat: Bavaria 36
Posts: 22,801
Images: 3
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

Quote:
Originally Posted by CaptainRivet View Post
You can program your MMSI as many times as you want to. This is no proretary device from raymarine, B&G etc where they use this excuse "Security" to simply make money and make it as uncomfortable and time consuming so you buy their newest device instead. Went through that nightmare with raymarine VHF and out of principal set it tnrough, 2 weeks and 120Euro fee+shipping for simply change a number...



And HA102 has an official and registered CE certification, the German officials from "Bundesnetzagentur" checked mine, all ok. Which means it has an international acceptance too.


This is NOT the case

AIS approval means in the USA the user cannot program the AIS MMSI At all. In Europe you are allowed the initial programming yourself but it requires a factory reset

Srt which make most of these OEM brands has a password lock on the reset. Without that password you can’t reset the system to put in a new mmsi.

The reason it’s this way is to conform with the acceptance legislation not because manufacturers want money ( they would be delighted if the rules were changed and have argued they should be , in particular the US has held firm on this )
__________________
Interested in smart boat technology, networking and all things tech
goboatingnow is offline   Reply With Quote
Old 18-07-2021, 01:55   #54
Registered User
 
Simi 60's Avatar

Join Date: Jun 2016
Location: Australia
Boat: Milkraft 60 ex trawler
Posts: 4,651
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

Quote:
Originally Posted by goboatingnow View Post
This is NOT the case

AIS approval means in the USA ........

You do realise that USA is not the world right?
Simi 60 is offline   Reply With Quote
Old 18-07-2021, 01:59   #55
Nearly an old salt
 
goboatingnow's Avatar

Join Date: Jun 2009
Location: Lefkas Marina ,Greece
Boat: Bavaria 36
Posts: 22,801
Images: 3
How to connect Matsutec HA102 AIS transponder to Raymarine

Quote:
Originally Posted by Simi 60 View Post
You do realise that USA is not the world right?


Any AIS will be built to certification standards either in the US , or Europe ( usually both ) as almost every other jurisdiction accepts these or duplicates these.

That’s not to say a device is certified to US or EU standards , but the manufacturer in question does indicate the device is built to the relevant IEC standards. This limit the MMSI programming regime

My point was the MMSI lock is not a device to make a manufacture money , it’s a requirement of certification that the manufacturer is forced to follow
__________________
Interested in smart boat technology, networking and all things tech
goboatingnow is offline   Reply With Quote
Old 26-10-2021, 05:18   #56
Registered User

Join Date: Oct 2021
Posts: 1
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

Quote:
Originally Posted by CaptainRivet View Post
You can program your MMSI as many times as you want to. This is no proretary device from raymarine, B&G etc where they use this excuse "Security" to simply make money and make it as uncomfortable and time consuming so you buy their newest device instead. Went through that nightmare with raymarine VHF and out of principal set it tnrough, 2 weeks and 120Euro fee+shipping for simply change a number...

And HA102 has an official and registered CE certification, the German officials from "Bundesnetzagentur" checked mine, all ok. Which means it has an international acceptance too.
@CaptainRivet,
Sorry to bother, but found your comment on AIS transponder HA102 and wanted to ask you where did you buy it? I live myself in Germany, and willing to connect it with Axiom chart plotter. Does it require any advanced skills to make it work with Raymarine?

I found on Alibaba following supplier. I do not have great experience with purchases on Alibaba so if you could share your source it would help me a lot
Greetings
Marcel

https://huayang-tech.en.alibaba.com/product/60434249273-209839906/HA_102_Class_B_AIS_receiver_and_transmitter.html?s pm=a2700.shop_cp.61684.11.2ca24000vwutDF
CosmoCruiser is offline   Reply With Quote
Old 22-11-2021, 07:51   #57
Registered User

Join Date: Dec 2009
Location: Hong Kong
Boat: '02 Jeanneau Sun Odyssy 43DS
Posts: 136
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

Quote:
Originally Posted by CosmoCruiser View Post
@CaptainRivet,
Sorry to bother, but found your comment on AIS transponder HA102 and wanted to ask you where did you buy it? I live myself in Germany, and willing to connect it with Axiom chart plotter. Does it require any advanced skills to make it work with Raymarine?

I found on Alibaba following supplier. I do not have great experience with purchases on Alibaba so if you could share your source it would help me a lot
Greetings
Marcel

https://huayang-tech.en.alibaba.com/product/60434249273-209839906/HA_102_Class_B_AIS_receiver_and_transmitter.html?s pm=a2700.shop_cp.61684.11.2ca24000vwutDF
I got mine from TaoBao ( the chinese version of Aliexpress)

cheers
andreshs1 is offline   Reply With Quote
Old 31-05-2022, 23:37   #58
Registered User

Join Date: May 2022
Posts: 2
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

Did any of you resolve the silent issue? Has anyone got copies of the firmware?

I programmed mine and it sometimes will transmit, but then suddenly stopped, now only transmits every now abs again (hours apart) - it says it’s in stodma mode when it starts up (looking at the rs232 data)

My HA102 powers up, gets a fix, but doesn’t transmit for hours, (checked by looking at other boats plotters and watching the rs232 data stream.

Does anyone know if the rs232 data shows it trying to transmit? It does when you press the emergency button.
Diva6500 is offline   Reply With Quote
Old 18-06-2022, 10:17   #59
Registered User

Join Date: Jun 2022
Posts: 1
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

Hi ,
Can you please share your contact at Matsutec ? I have the same problem but I can't reach help
NPRIOUX is offline   Reply With Quote
Old 14-02-2023, 06:17   #60
Registered User

Join Date: Nov 2021
Posts: 32
Re: How to connect Matsutec HA102 AIS transponder to Raymarine

Quote:
Originally Posted by CaptainRivet View Post

And HA102 has an official and registered CE certification, the German officials from "Bundesnetzagentur" checked mine, all ok. Which means it has an international acceptance too.



Hi! Do you have a copy of the CE Certification?
I contacted a few dealers but none of them could or wanted to send it to me.


Cheers,



Will
freaky930 is offline   Reply With Quote
Reply

Tags
ais, grass, marine, raymarine

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Matsutec AIS transponder pendragon OpenCPN 20 09-08-2016 08:49
Matsutec AIS/GPS Units upload waypoints OpenCPN? Canuck Sailor OpenCPN 1 01-04-2015 02:33
Wiring Seiwa Barracuda igps to AIS transponder (Matsutec) sailingsamba Marine Electronics 0 16-11-2014 03:01
AIS Transponder: Yes or No Lars_L Health, Safety & Related Gear 113 07-10-2012 05:48
Connecting AIS Transponder to Raymarine E80 nigel1 Navigation 5 15-01-2011 04:19

Advertise Here


All times are GMT -7. The time now is 10:32.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.