HELP! Need RT80 VHF Schematic - B&G , Kenyon , Vigil ... All the Same

[Wireless1]

I used to have the coolest old retro VHF on my Morgan 41 mounted at the helm. It was a full featured VHF (too old to have DSC/AIS though) and was small enough that it fit inside an Edson single instrument pod. I came across another one for FREE but it doesn't work. So...I repaired it (common internal problem to them all) but... I don't have the pin out on the multi-conductor cable that comes out the back. Does anyone have a PDF of the manual, or could scan a copy of the manual? This unit was made by Ross Engineering of Largo, Florida and was marketed as the B&G "Network VHF" and the Kenyon RT80 and the Vigil RT80 VHF, and they are ALL the same unit. Any help on this is GREATLY appreciated.

Thanks in advance!

[GordMay]

Network VHF User Manual (p 12)
➥ http://www.bandg.com/upload/BandG/Do...vhf_manual.pdf

[Wireless1]

Originally Posted by GordMay

Network VHF User Manual (p 12)
➥ http://www.bandg.com/upload/BandG/Do...vhf_manual.pdf

Hey thanks!! This model in the manual is slightly different than the one I have but perhaps the cable pin out and color code is the same. I don't need anything but the speaker output so I'll put an AC voltmeter on that pair and see if there is any AC output before I connect a real speaker to it. (Blk/Red could be DC! Yikes!) Thanks so much for your help!

Cheers!
PS - Did a performance at your local community theatre years ago! BRRRRRRRR.... it was cold up there!