Hi Guys,
I am using this plotter along with a Verspermarine
AIS. I am using the plotter's internal
GPS to provide position information to the
AIS over
NMEA 0183. I set up
NMEA port 1 outbound and it works great.
Now I would like to get AIS Data to the plotter.
NMEA 1 has both Input and Output leads suggesting it can be used for both at the same time.
Is this the case or should I use NMEA 1 for
GPS output and NMEA2 for AIS input?
TIA
Steve
Sent from my
iPhone using Cruisers Sailing Forum