Cruisers Forum
 

Go Back   Cruisers & Sailing Forums > Engineering & Systems > Marine Electronics
Cruiser Wiki Click Here to Login
Register Vendors FAQ Community Calendar Today's Posts Log in

Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 26-04-2021, 02:58   #1
Moderator
 
Dockhead's Avatar

Cruisers Forum Supporter

Join Date: Mar 2009
Location: Denmark (Winter), Helsinki (Summer); Cruising the Baltic Sea this year!
Boat: Cutter-Rigged Moody 54
Posts: 33,865
Expedition and OpenCPN on the Same Box?

Anybody see a problem running Expedition and OpenCPN on the same box?


OpenCPN speaks 0183 and is connected to the boat network via the Ethernet port of a Zeus plotter.


Expedition speaks N2K and will be connected to the boat network via an NGT-1.


No conflict there?


And for bonus points: Does anyone know whether you can use the same OSenc charts registered to the box, in both O and Expedition?
__________________
"You sea! I resign myself to you also . . . . I guess what you mean,
I behold from the beach your crooked inviting fingers,
I believe you refuse to go back without feeling of me;
We must have a turn together . . . . I undress . . . . hurry me out of sight of the land,
Cushion me soft . . . . rock me in billowy drowse,
Dash me with amorous wet . . . . I can repay you."
Walt Whitman
Dockhead is offline   Reply With Quote
Old 09-05-2021, 04:49   #2
Registered User

Join Date: Jan 2016
Posts: 117
Re: Expedition and OpenCPN on the Same Box?

I run both concurrently on laptop and have no conflict or performance issues.
You can deselect certain outputs if there is conflict in both software platforms.
It can get tricky if you send routes to a chartplotter.
Mattzilla is offline   Reply With Quote
Old 09-05-2021, 04:57   #3
bcn
Registered User

Join Date: May 2011
Location: underway whenever possible
Boat: Rangeboat 39
Posts: 4,734
Re: Expedition and OpenCPN on the Same Box?

Quote:
Originally Posted by Dockhead View Post
And for bonus points: Does anyone know whether you can use the same OSenc charts registered to the box, in both O and Expedition?

oeSENC and oeRNC charts are only for OpenCPN or apps using the OpenCPN core and o-charts plug-ins.
Think o-charts as a part of OpenCPN - just a different entity for legal reasons.
bcn is offline   Reply With Quote
Old 09-05-2021, 07:53   #4
Registered User

Join Date: Jan 2016
Posts: 117
Re: Expedition and OpenCPN on the Same Box?

I use the AUS ENC charts in both OpenCPN and Expedition. I had to enable S63 on OpenCPN and an O-charts fingerprint/permit.
Mattzilla is offline   Reply With Quote
Old 09-05-2021, 08:04   #5
bcn
Registered User

Join Date: May 2011
Location: underway whenever possible
Boat: Rangeboat 39
Posts: 4,734
Re: Expedition and OpenCPN on the Same Box?

S-63 is a different topic. Even in this case you will need two different S-63 UserPermits and two licenses for the official charts from AHS.
The UserPermits are specific for the different platforms. Different S-63 OEMs in IHO speak.



If you run the corresponding oeSENC charts for Australia you have the same content as in S-63.
At a lower cost.


Hubert
bcn is offline   Reply With Quote
Old 09-05-2021, 08:18   #6
Registered User

Join Date: Jan 2016
Posts: 117
Re: Expedition and OpenCPN on the Same Box?

Quote:
Originally Posted by bcn View Post
S-63 is a different topic. Even in this case you will need two different S-63 UserPermits and two licenses for the official charts from AHS.
The UserPermits are specific for the different platforms. Different S-63 OEMs in IHO speak.



If you run the corresponding oeSENC charts for Australia you have the same content as in S-63.
At a lower cost.


Hubert
Correct, I have 2 x permit files for each platform.
The OESENC charts would be great if could use in Expedition, however cannot so then limited to the AUSENC or would have to purchase CMAP.
Mattzilla is offline   Reply With Quote
Reply

Tags
enc, opencpn


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Shorted Battery - now Switch board Voltmeter no longer same same multimeter reading Caroline Joan Electrical: Batteries, Generators & Solar 0 23-07-2018 09:14
Same Chemistry, Same Age, Different AH Thin Line Electrical: Batteries, Generators & Solar 13 23-02-2015 07:28
Same old, same old in the polar regions knottybuoyz Polar Regions 4 07-03-2008 17:44

Advertise Here


All times are GMT -7. The time now is 20:17.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.