Hello - We have the Datamarine 5000 Link on our sailboat and we now have other newer instruments to replace it all but the wind
component. So, we are keeping the Datamrine Link 5000 just to use for the wind
. I bought a used wind gauge, Datamarine link CF01050 to replace the cluster of three instrument panel we have. I can't find any information out there on how to connect it to the Link 5000 though. It has a different connect then my current
instrument panel. My questions:
Can I connect the current
datamarine network cable (that was going the cluster panel) we have to the wind gauge and if so, do you know what type of connector I need?
The current connector on the network cable is for a quick release kind of thing, a BNC. So I will need to replace it or find a connector piece to transition from the wind gauge female end to the quick release BNC cable connection. But I don't know what kind of connector to get.
Thank you for any information - photos attached.