B&G to Raymarine integration

[valmeida]

After some time using my system, I think it's time for an update that can help some sailors:
1. The system is a Zeus 3 and a Triton2 with B&G wind, depth and speed sensors, all in a Nmea 2000 network. Also, a Raymarine EV-100 wheel drive with a P70 controller and a EV-1 Sensor Core that are connected to the Nmea 2000 network via a Nmea2000-Seatalkng connector.
2. The system integrates very well. Of course you can't control the auto-pilot with the Zeus3, but the B&G system receives heading information from the Raymarine EV-1.
3. When a route is started on the Zeus3, the autopilot will follow that route, making off-track corrections!
4. When reaching a waypoint on the Zeus3, the autopilot (in the P70 controller) asks if you want to turn to the next waypoint, it's just a matter of selecting Yes!
I am very satisfied with this solution of having both systems integrated.

Open to questions

[Harveyhall]

Good Evening.
I have the same Zeus 3 with Raymarine wind instruments and a Raymarine Autopilot Raymarine ST 4000 MK2 Wheel Drive. I can not get the Zeus 3 to recognize the autopilot. Do you have any secrets to connect?

Also I have a problem with my AIS as my own boat shows as moving at a 30 degree angle. Any thoughts on that one.
Thanks for any help you can give.
Harvey