I have a B&G
zues 2 chartplotter
, 4 years old, 3 major firmware upgrades, no update to the manual! This is very frustrating as they have changed the user interface with no explanation of how to do things. I have even asked a high school
age person to try to figure it out ;-)
Anyway, when you have a route
set, at each waypoint it asks you to confirm the course change. It shows up the screen
asking for confirmation. However, if you are away from the plotter, you don't know as there is no audible alarm
i KNOW there must be a way to set this alarm! I just can figure out how to make a global change so that all route
alarms are audible. It would be even better if I can change the sound of the alarm
so I can differentiate from when the boat
is on autopilot
mode, the alarm when the course changes more than 20 deg would be different from another alarm.
A second question would be if my remote autopilot
fob could accept/deny a course change, so then if it wasn't at the screen
, but heard the alarm, I could just hit the red or green key on the fob.