5.2vdc from 12vdc?

[anathema]

Sure charlie no problem.

If you do not want to go the cheap route of a regulator that you just solder on-to yourself, going the way suggested above of a more expensive DC-DC converter would maybe be the way to go, as they are premade with bare wires ready to connect to.

Good luck!

Originally Posted by Charlie

This stuff will make me think too hard. I am thinking of A) check the voltage coming out of the transformer and then b) contacting the manufacture to see if there is a range of voltages that are acceptable. From there I will PM you electrical types and see if I can figure this out.

[senormechanico]

Charlie,
One more thing to note:
The voltage coming out of the transformer will probably read way high without the load attached. Check with the load as well before your head explodes from confusion!

Steve B.