S and L anchor windless

[Brian S]

I just received a used S and L hyspeed in pieces in a box. The owner said its all complete. The parts seem to be there and it looks srtight forward to reassemble. The problem is what way do the sprockets go. They are one way turning only and hard to get in and lined up, I only want to do this once. I cannot find any info on them except the owners manual, with just operating info.
Does anyone know which way the sprockets go? Does the port spin forward or back, same for the Stanford. Any ideas

[groundtackle]

I just rebuilt mine and its your lucky day cause I think I have photos
Pm me
Nick


Sent from my iPhone using Cruisers Sailing Forum

[GordMay]

➥ http://www.cruisersforum.com/forums/...lass-6794.html

➥ http://www.fujiyachts.net/manuals/Si...rts%20List.pdf

[groundtackle]

Did you get my email and photo?



Sent from my iPad using Cruisers Sailing Forum

[Brian S]

Yes thank you., Do you know the rotation direction of the pulleys? Port forward starboard backward? Or opposite. Thanks for any info.

[groundtackle]

The sprocket gears both turn the main shat in the same direction because the chain for the inner one moves it on the forward stroke while the outer one moves it on the back stroke that's why the inner chain one loops around the pins and engages the aft side of the inner sprocket


Sent from my iPad using Cruisers Sailing Forum

[groundtackle]

Uh....that should be shaft


Sent from my iPad using Cruisers Sailing Forum

[Brian S]

O K that answers my question, what stroke does what. I'll give it a try, thanks for your help

[groundtackle]

No worries and good luck


Sent from my iPad using Cruisers Sailing Forum

[groundtackle]

You should check the parts diagram to make sue you have all the bushings and spacers too


Sent from my iPad using Cruisers Sailing Forum

[miked159]

Originally Posted by nshawdvm

I just rebuilt mine and its your lucky day cause I think I have photos
Pm me
Nick


Sent from my iPhone using Cruisers Sailing Forum

I am rebuilding mine as well. Could I bother you to send me those pics as well?

Thank you,

[Celestialsailor]

Ya gotta love this forum...

[groundtackle]

Originally Posted by miked159

I am rebuilding mine as well. Could I bother you to send me those pics as well?



Thank you,

Sure pm me your email address
Nick


Sent from my iPhone using Cruisers Sailing Forum

[deedc]

our gears are all ok
however the oil leaked from the gear box last winter....Michigan Winter!
any suggestions about fixing and/ or getting it out of our Jeanneau 40DS to have it serviced...

went last season without, as my captain tried to figure it out.....not going to be so patient this summer....

thanks

[groundtackle]

Just unbolt it take it into your shop take it apart , clean all the parts replace the gaskets and if necessary the bushings and reassemble it. It's really not complicated. Oh and refill it with oil!
Nick


Sent from my iPad using Cruisers Sailing Forum