Interphase Forward-Looking Sonar

[Lagoon4us]

Totally aware of that we have two units on board one inside the cabin and one mounted outside at the upper helm position.

The outside unit has developed fog inside hence not waterproof it would seem.

Cheers

[Rob 1936]

My display is in the cockpit under the dodger, doesn't get wet. I have heard of some units getting condensation as you have. Should go away after unit warms up.
Contact Cory Atkinson at Interphase Technical.
cory@interphase-tech.com
831-477-4944 ext 16
He knows about this.
Garmin took over Interphase a while ago. Hope he is still there.
Take care.

[Rob 1936]

Lagoon4us
Aside from your issue, make sure you have software upgrade 1.19 or later.

[Lagoon4us]

Taking the fogged one back to Australia at xmas, thanks for that.

[ted4200]

I Have an old Interphase Probe that is mounted out in the cockpit. Our cockpit cover was ripped off in Cyclone Yazi. There was no problem with water,
plenty of it) however,between the cyclone and the trip from Port Hinchinbrook to Townsville the unit was exposed to sunlight The screen was irrepairably damaged by sun exposure
We had many years of good service from this unit.Iam informed by the agents that parts (a new screen ) are no longer available.
If anyone is upgrading, I would be willing to pay a reasonable price for your old unit. ( I do not need the transducer)
Regards Ted from Oz

[GordMay]

Greetings and welcome aboard the CF, Ted.

[Popeye46]

Originally Posted by ted4200

I Have an old Interphase Probe that is mounted out in the cockpit. Our cockpit cover was ripped off in Cyclone Yazi. There was no problem with water,
plenty of it) however,between the cyclone and the trip from Port Hinchinbrook to Townsville the unit was exposed to sunlight The screen was irrepairably damaged by sun exposure
We had many years of good service from this unit.Iam informed by the agents that parts (a new screen ) are no longer available.
If anyone is upgrading, I would be willing to pay a reasonable price for your old unit. ( I do not need the transducer)
Regards Ted from Oz

I just bought a perry 44 passagemaker she has a interphase SE 200 with no display. The seller said he did not know if it worked. I have done a little research on it and maybe you csn use any VGA monitor.