Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 28-09-2014, 17:16   #1
Registered User

Join Date: Jan 2010
Location: Port Ludlow Wa
Boat: Makela,Ingrid38,Idora
Posts: 2,050
Electric motor for manual windlass

Got a little time on my hands. Thinking about attaching an electric motor to the low speed side of my windlass. Maybe even make a coupling and use a large cordless drill to pull up the rode prior to the dead lift. Anybody ever try this?
IdoraKeeper is offline   Reply With Quote
Old 28-09-2014, 17:26   #2
S/V rubber ducky
 
sailorboy1's Avatar

Join Date: Jul 2007
Location: heading "south"
Boat: Hunter 410
Posts: 20,362
Re: Electric motor for manual windlass

just an FYI - a replacement motor for my windlass last year was about 40% of a whole new unit.
__________________
Don't ask a bunch of unknown forum people if it is OK to do something on YOUR boat. It is your boat, do what you want!
sailorboy1 is offline   Reply With Quote
Old 28-09-2014, 17:37   #3
Registered User
 
UNCIVILIZED's Avatar

Join Date: Jun 2014
Location: Up the mast, looking for clean wind.
Boat: Currently Shopping, & Heavily in LUST!
Posts: 5,629
Re: Electric motor for manual windlass

Tom Neale, who writes for/wrote for "Cruising World" amongst other things, made mention of permanently affixing an automobile starter motor to their manual windlass. After which he sealed it up & called it good. It's mentioned in his book "All in The Same Boat: Family Live Aboard & Cruising". IIRC, I read it back in '97 when I was living on the hook, with lots of time on my hands.

And supposedly, Ideal Windlass's are powered by Chevy starter motors. Something I seriously intend to look into. As (in theory at least) it make having spares around, cheap & easy.
__________________

The Uncommon Thing, The Hard Thing, The Important Thing (in Life): Making Promises to Yourself, And Keeping Them.
UNCIVILIZED is offline   Reply With Quote
Old 28-09-2014, 19:18   #4
Registered User
 
Ryan H's Avatar

Join Date: Sep 2011
Location: Massachusetts
Boat: Grampian 26, Mercury 15, Formosa 41
Posts: 274
Images: 3
Re: Electric motor for manual windlass

Haven't done it yet, but you may want to look out for a permanent magnet motor from a treadmill. Big enough, powerful enough, can be made water tight with a PVC housing if on deck, probably better off mounted below deck but my drag turbine has spent it's life on deck and been okay. Let me know how you do.

Sent from my SGPT12 using Cruisers Sailing Forum mobile app
Ryan H is offline   Reply With Quote
Old 29-09-2014, 10:26   #5
Registered User

Join Date: Jan 2010
Location: Port Ludlow Wa
Boat: Makela,Ingrid38,Idora
Posts: 2,050
Re: Electric motor for manual windlass

Good idea about the starter motor. I don't want to cut any holes in my teak deck which (knock on wood) has no leaks. That means the battery and motor need to be stashed below until it's needed. Making a portable power pack will be interesting. The ultimate lifting power will be unlikely to be able to lift that big old CQR over the roller but if I can speed up the recovery of the majority of the chain that will be a big help.
IdoraKeeper is offline   Reply With Quote
Old 29-09-2014, 11:46   #6
Moderator Emeritus
 
a64pilot's Avatar

Cruisers Forum Supporter

Join Date: Oct 2013
Location: Jacksonville/ out cruising
Boat: Island Packet 38
Posts: 31,351
Re: Electric motor for manual windlass

Here you go, this is how we used to start Drag bikes, very portable
STARTER, HIGH-TORQUE, SUZUKI/KAWASAKI
a64pilot is offline   Reply With Quote
Old 29-09-2014, 12:25   #7
Registered User

Join Date: Jan 2010
Location: Port Ludlow Wa
Boat: Makela,Ingrid38,Idora
Posts: 2,050
Re: Electric motor for manual windlass

Good idea but its gotta be clockwise rotation.
IdoraKeeper is offline   Reply With Quote
Old 29-09-2014, 12:35   #8
Registered User

Join Date: Sep 2013
Location: Alert Bay, Vancouver Island
Boat: 35ft classic ketch/yawl.
Posts: 1,980
Images: 4
Send a message via Skype™ to roland stockham
Lightbulb Re: Electric motor for manual windlass

Haven't thought this out but it just occurred to me reading this post.
What about using an air spanner with a windlass drum attached. Lots of tauque (they do up wheel nuts!) adjustable ratchet for if anything jams and the compressor can be mounted near the batteries so no need for long cable runs or a separate battery, just a single air line. Units are very rugged and designed for continuous shop us.
roland stockham is offline   Reply With Quote
Old 29-09-2014, 12:40   #9
Registered User
 
rwidman's Avatar

Join Date: Feb 2008
Location: North Charleston, SC
Boat: Camano Troll
Posts: 5,176
Re: Electric motor for manual windlass

Quote:
Originally Posted by IdoraKeeper View Post
Got a little time on my hands. Thinking about attaching an electric motor to the low speed side of my windlass. Maybe even make a coupling and use a large cordless drill to pull up the rode prior to the dead lift. Anybody ever try this?
Not to state the obvious, but have you considered just installing an electric windlass?
__________________
Ron
HIGH COTTON
rwidman is offline   Reply With Quote
Old 29-09-2014, 13:19   #10
Registered User

Join Date: Jan 2010
Location: Port Ludlow Wa
Boat: Makela,Ingrid38,Idora
Posts: 2,050
Re: Electric motor for manual windlass

Yes I have but wouldn't it be cool to just walk forward with a big old multiple purpose drill and crank up most of the rode without all the drilling of holes and pulling of heavy wire and installing of breakers?
IdoraKeeper is offline   Reply With Quote
Old 29-09-2014, 13:31   #11
Registered User

Join Date: Sep 2013
Location: Alert Bay, Vancouver Island
Boat: 35ft classic ketch/yawl.
Posts: 1,980
Images: 4
Send a message via Skype™ to roland stockham
Re: Electric motor for manual windlass

Also if you already have a good manual one fitted be nice to add power without having to replace the whole unit
roland stockham is offline   Reply With Quote
Old 29-09-2014, 13:35   #12
Registered User

Join Date: Jan 2010
Location: Port Ludlow Wa
Boat: Makela,Ingrid38,Idora
Posts: 2,050
Re: Electric motor for manual windlass

And it still retains all manual functions when they are needed.
IdoraKeeper is offline   Reply With Quote
Old 29-09-2014, 13:44   #13
Marine Service Provider

Join Date: May 2012
Location: New Orleans
Boat: We have a problem... A serious addiction issue.
Posts: 3,974
Re: Electric motor for manual windlass

Quote:
Originally Posted by IdoraKeeper View Post
Yes I have but wouldn't it be cool to just walk forward with a big old multiple purpose drill and crank up most of the rode without all the drilling of holes and pulling of heavy wire and installing of breakers?
The reason you need to pull those big cables is to carry enough charge to actually pull up hundreds of pounds of steel. Sure you can get an electric motor to the bow, but I don't think an electric drill is going to have enough battery power to matter much.

You might be able to mount a starter motor, or anther scavenged electric motor, but you will still have to run the wires.
__________________
Greg

- If animals weren't meant to be eaten then they wouldn't be made of food.
Stumble is offline   Reply With Quote
Old 29-09-2014, 13:54   #14
Registered User
 
rwidman's Avatar

Join Date: Feb 2008
Location: North Charleston, SC
Boat: Camano Troll
Posts: 5,176
Re: Electric motor for manual windlass

Quote:
Originally Posted by IdoraKeeper View Post
Yes I have but wouldn't it be cool to just walk forward with a big old multiple purpose drill and crank up most of the rode without all the drilling of holes and pulling of heavy wire and installing of breakers?
Some folks get a kick out of doing things differently or doing them the hard way. Certainly if folks saw you doing this and understood what you were doing, they would remember you.

Other folks are content on doing things the tried and proven way even if it's not as exciting. Personally, I did pull the heavy wires and install a breaker. It was a little work up front but now I can just push a button to raise my anchor. My way becomes really convenient if it's raining or we are in heavy seas.
__________________
Ron
HIGH COTTON
rwidman is offline   Reply With Quote
Old 29-09-2014, 13:56   #15
Registered User

Join Date: May 2014
Location: Al
Boat: 1981 51' Formosa
Posts: 187
Re: Electric motor for manual windlass

This should get the job done DeWalt 36V Impact Driver | Toolmonger
Formosa Scott is offline   Reply With Quote
Reply

Tags
electric, electric motor, manual windlass, motor, wind, windlass

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Replace Manual Windlass With Electric (merged) petert96753 Anchoring & Mooring 28 06-04-2014 11:25
For Sale: YANMAR Service Manual, Parts Catalog, Operation Manual Kohanadiver Classifieds Archive 0 22-02-2013 12:41
Bench Test an Electric Windlass Motor? SkiprJohn Anchoring & Mooring 7 19-06-2011 16:28
For Sale: Windlass: Simpson Lawrence 555 Two-Speed Manual Windlass Clone captnrog Classifieds Archive 13 18-10-2010 07:12
Yanmar 4JH2E owner's manual (not service manual) janders Engines and Propulsion Systems 4 19-02-2009 11:13

Advertise Here


All times are GMT -7. The time now is 01:48.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.