Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 30-10-2009, 08:46   #1
Registered User

Join Date: Apr 2008
Location: Panama
Boat: FP Belize 43
Posts: 125
Bridle and Rode Question

Hi Cruisers,

We are in the process of re-doing and replacing all of our ground tackle and since I am so new to all this I have constant questions.. Hopefully soon I will have more knowledge and be able to contribute more..

We are building a new bridle and our everyday anchoring set up will be 60' of 3/8" HT chain attached to 150' of 3/4" line.

With our old setup we were attaching the bridle to the chain with a snap shackle.

With our new setup I want to be able to attach the bridle to the 3/8" line. But I don't know how to make this work well or even if it is safe way to go..

Can I get some ideas on this setup and advice from others that have done this?

Regards to all,

Meck
__________________
"Learn the laws so you can break them properly." DL
Meck is offline   Reply With Quote
Old 30-10-2009, 09:00   #2
Marine Service Provider
 
edsailing's Avatar

Join Date: Apr 2009
Location: Devon, UK
Boat: Sailing vessels up to 200 tons
Posts: 388
Images: 1
You could use a rolling hitch.............

http://www.animatedknots.com/rolling...matedknots.com
__________________
Regards, Ed

Delivering boats for a living - no more!
edsailing is offline   Reply With Quote
Old 30-10-2009, 10:00   #3
Registered User

Join Date: Apr 2008
Location: Panama
Boat: FP Belize 43
Posts: 125
Thanks Ed,

Looking at that knot for a second time, I'm wondering how I will be able to make it work with since I won't have any rope ends..

I won't have the end of rode and the bridle forms a "V" with each end connected to a bow.

Thanks,
Meck
__________________
"Learn the laws so you can break them properly." DL
Meck is offline   Reply With Quote
Old 30-10-2009, 10:15   #4
Marine Service Provider
 
edsailing's Avatar

Join Date: Apr 2009
Location: Devon, UK
Boat: Sailing vessels up to 200 tons
Posts: 388
Images: 1
Make the "V" into a "Y" where the leg of the "Y" is a length of rope and use this to tie a rolling hitch onto the anchor rode.
__________________
Regards, Ed

Delivering boats for a living - no more!
edsailing is offline   Reply With Quote
Old 30-10-2009, 10:55   #5
Registered User
 
Cheechako's Avatar

Join Date: Aug 2006
Location: Skagit City, WA
Posts: 25,515
I'm guessing you are a Cat? How about just tieing off the rode on one hull and using a line with a large snatch block to the other hull?
Cheechako is offline   Reply With Quote
Old 30-10-2009, 11:03   #6
Marine Service Provider
 
edsailing's Avatar

Join Date: Apr 2009
Location: Devon, UK
Boat: Sailing vessels up to 200 tons
Posts: 388
Images: 1
That's a neat solution Cheechako, why didn't it occur to me? Just need to make sure that the snatch block is up to the job.
__________________
Regards, Ed

Delivering boats for a living - no more!
edsailing is offline   Reply With Quote
Old 30-10-2009, 11:10   #7
Registered User
 
Cheechako's Avatar

Join Date: Aug 2006
Location: Skagit City, WA
Posts: 25,515
Yea if you've got cleats big enough for 3/4" it'll work, they make some big snatch blocks... $$$... but they are rated far above anything the rode is going to see!
Cheechako is offline   Reply With Quote
Old 30-10-2009, 11:38   #8
Registered User
 
Steve_C's Avatar

Join Date: Apr 2009
Location: La Rochelle, France
Boat: L42
Posts: 530
You can also use a second line from the second bow and tie into the rode. I use a bowline as if the loop of the bowline where going to bow one and returning from bow 2. Hard to describe, perhaps you can tell what I'm talking about from my Picasso like drawing!!!
Attached Thumbnails
Click image for larger version

Name:	Anchor Bridle Bowline.JPG
Views:	1660
Size:	15.3 KB
ID:	10780  
Steve_C is offline   Reply With Quote
Old 30-10-2009, 12:23   #9
Senior Cruiser
 
GordMay's Avatar

Cruisers Forum Supporter

Join Date: Mar 2003
Location: Thunder Bay, Ontario - 48-29N x 89-20W
Boat: (Cruiser Living On Dirt)
Posts: 49,394
Images: 241
A prussic (tripple sliding) rolling, or other hitch can be tied on a bight.
__________________
Gord May
"If you didn't have the time or money to do it right in the first place, when will you get the time/$ to fix it?"



GordMay is offline   Reply With Quote
Old 30-10-2009, 12:31   #10
Registered User
 
Cheechako's Avatar

Join Date: Aug 2006
Location: Skagit City, WA
Posts: 25,515
That bowline idea is nice! The snatchblock allows rode to be adjusted in/out ....
Cheechako is offline   Reply With Quote
Old 30-10-2009, 12:53   #11
cruiser

Join Date: Aug 2005
Location: No longer post here
Boat: Catalac Catamaran
Posts: 2,462
Popular with catamaran owners

Hurricane Anchor System | Colligo Marine
Tropic Cat is offline   Reply With Quote
Old 30-10-2009, 13:45   #12
Registered User
 
cburger's Avatar

Join Date: May 2006
Location: Nyack, NY
Boat: Westsail 32
Posts: 1,694
Images: 1
Problem with affixing line to line will be chafe. Need to install some chafing gear so you don't go bump in the night.
cburger is offline   Reply With Quote
Reply

Tags
bridle, rode


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anchor Rode Bridle and Snubber Benny Anchoring & Mooring 17 08-09-2009 16:46
Towing bridle Aquah0lic Auxiliary Equipment & Dinghy 4 16-01-2009 08:47
Anchor Bridle S/V Mother Ocean Multihull Sailboats 5 06-11-2008 06:27
Anchor Bridle S/V Mother Ocean Monohull Sailboats 3 31-10-2008 12:11
Anchor Bridle Limpet Multihull Sailboats 8 06-08-2008 06:43

Advertise Here


All times are GMT -7. The time now is 13:37.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.