Bow Roller for Manson Supreme Anchor

[Jon Neely]

I am currently rebuilding our boats bow fitting to accommodate two anchors, one 22lb delta and a 25lb Manson supreme. It needs to be affordable (no more than $150 ea) and well built. I was looking at kingstons and wind line. any opinions and fit notes would be great!
Thanks, jon (caliber 28 "Tara")

[roverhi]

I've got a Simpson Lawrence/Lewmar bow roller designed for CQR anchors (Part Number 66840010) up to 45 lbs. Don't know what this piece of stainless cost new from a store. I bought it new off of Ebay for a $130. It's worked fine for my 35 pound Manson. would assume any anchor roller/platform that will work with CQR/Bruce/Delta anchor will work just fine with a Manson.

The concern with Mansons is that there are no obstruction that will interfere with the roll bar. Those are mostly boat related, not anchor roller problems. Usually it's boats with an anchor roller on a bowsprit that have issues with the Manson because the rollers are mounted on the side of the bowsprit or the bowsprit platform.