Cruisers Forum

  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
Thread Tools Search this Thread Rate Thread Display Modes
Old 12-08-2008, 20:30   #1
Registered User

Join Date: Jun 2008
Posts: 4

HI all can anyone help ? I have a 1992 26 ft. Rogue Cruiser and i am trying to take the vertical windlass out, i took the screws off the top part of the windlass on the Bow and the nuts off the bolts under the bow in the cabin where the line comes in and i still cant take it off. I looked all over the windlass and i cant find any more screws or bolts that is still holding it. I also tried to pry it off a little but i don't want to break it . It has a lot of salt on it so i am thinking it is just stuck . Does any one have any ideas or information on this?
Thanks, John
machado1 is offline   Reply With Quote
Old 13-08-2008, 01:10   #2
Senior Cruiser
GordMay's Avatar

Cruisers Forum Supporter

Join Date: Mar 2003
Location: Thunder Bay, Ontario - 48-29N x 89-20W
Boat: (Cruiser Living On Dirt)
Posts: 46,449
Images: 241
The windlass base may also have been bonded to the deck with a structural adhesive, or a tenacious bedding compound.
Gord May
"If you didn't have the time or money to do it right in the first place, when will you get the time/$ to fix it?"

GordMay is online now   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Manual, vertical-axis anchor windlass Andy Construction, Maintenance & Refit 16 10-07-2016 05:09
Muir Vertical Windlass Question AnsleyS Anchoring & Mooring 15 04-01-2016 17:52
Windlass selection question jack & lola Anchoring & Mooring 7 08-05-2008 07:34
windlass question sneuman Construction, Maintenance & Refit 6 24-03-2008 06:10
Vertical learning curve! Borden Meets & Greets 3 18-10-2005 17:28

Advertise Here

All times are GMT -7. The time now is 09:18.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.