Metric Clevis Pins - Where to Find in US ?

[SV Demeter]

Im trying to locate metric clevis pins, specifically 10mm diameter. I believe overall lenagth is in the 24mm range but can confirm. I need 8 of them and have not had luck finding them in the US. Drilling chainplates to 7/16 is really not the route I wanted to go.

[atoll]

check on ebay.co.uk
or crusader marine,also vetus

[Blue Stocking]

Petersen.stainless.co.uk.

[captain465]

McMaster-Carr in New Jersey will likely have what you need.....McMaster-Carr.com

[SV Demeter]

Originally Posted by captain465

McMaster-Carr in New Jersey will likely have what you need.....McMaster-Carr.com

That was my first thought but no luck on SS metric pins.

[velero]

Try Fawcetts or Fastenal in Annapolis......

[SV Demeter]

Originally Posted by velero

Try Fawcetts or Fastenal in Annapolis......

Try again. Peterson does not carry a 10mm pin either. Closest they have is 9.5 which is basically 3/8"

[ggray]

I have found them somewhere, perhaps Fastenal or Eagle Fastener or a supplier in Massachusetts I have used (#800 metric1, I think). I need one longer than I could find so will have to make one from a bolt.

[velero]

Tasman Industries Ltd - Clevis Pins

Here is one vendor from the UK they have a 10 x 25 mm.

[delmarrey]

I'll bet if you call STA-LOC they'll sell you some. STA-LOK Terminals Ltd - Marine - Online Shop - Product Listing and Online Shop

STA-LOK TERMINALS INC
2725-1B Old Wrightsboro Road
Wilmington
North Carolina
28405
(910) 399 5206

[Shoalcove]

Try calling Rigging Only. I've found their service to be excellent.
HOME

[S/V Antares]

Maryland metrics for everything metric in pipe and fasteners, tools etc.

http://mdmetric.com/fastindx/uj2-03_06.pdf