Visit our Popular Forums

JBP · 12-02-2022, 09:38

I'm trying to find a few feet of ProFurl P31 foil section (round, 31mm). I can't seem to find anything on the Internet for such an old furler (which still works fine, I just want to make it a bit longer). Any suggestions?

AA3JY · 12-02-2022, 11:47

Maybe rigger shops that have replaced Profurl with newer rigs recently may have something

JBP · 12-02-2022, 17:15

Quote:

Originally Posted by AA3JY

Maybe rigger shops that have replaced Profurl with newer rigs recently may have something

I am not sure how to contact rigger shops across the country without calling each one.

**hpeer** · 12-02-2022, 19:35

Try. Rock Hall Marin3 Consignment. I just dropped off a working Profurl for which I could not get extrusions for. It was off a 33' cutter with 45' bridge clearance.

Rock Hall Marine Consignment - New & Used Marine Supplies, Clothing & Gear - Nautical Housewares & Antiques

JC Reefer · 12-02-2022, 19:46

Sailing services in Florida has some stock of older furling parts. Not sure if they’ll have it but it’s worth a shot.

JBP · 13-02-2022, 06:11

Is there a big name in used boat equipment? Like Powell's Book Store, but for boat equipment?

JBP · 13-02-2022, 06:27

Thanks, I emailed Rock Hall and Sailing Services.

**hpeer** · 13-02-2022, 11:27

Google Marine Consignment.

It is regional. Bacon Sails in Annapolis. Sailorman in St Augustine. Etc.

sailingchiro · 13-02-2022, 12:06

Darn, I have several P42 single track extrusions and some are slightly bent from previous owner knocking the mast down with a bridge. So, to confirm, mine are 1 5/8" across.

RLaird · 13-02-2022, 19:35

I have a complete Furler that I’ll need to check/measure up. Will advise.

JBP · 14-02-2022, 05:36

Thanks RLaird, I only need one section of foil and one intermediate connector with the bearing thingies. I could probably fudge those bearings with a 3d printer.