Hi,
I purchased a 1992
Hunter Legend 35.5 in the Nederland and transported into Hungary. Intending to
sale her on Lake Balaton. It is a lovely
boat and poopooing comments are not wellcome. Instead I need some helpful comments.
When hoisted the headsale the
furling rod in the center of the drum as attached do not stay in position therefore provisionally we tied a
rope to avoid moving. However, it does not seem to function properly. We found later on top of the pack of chains a piece shown on the right and maybe this is the piece should be attached. However, the pin which presently holds the
furler is 10 mm diameter and the hole on the piece is smaller, so it is unlikely they will fit together. Other problem is, that the must has no rake in it and it may be connected to the problem described above. I understand must rake in Hunters is controlled by only the length of the
furling system and if it is shorter it pulls the must forward.
Can anybody help me with some expert comments please? Michael-Louis.