Cruisers Forum
 


Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on Cruisers Forums. Advertise Here
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 26-07-2007, 16:44   #1
Registered User
 
Ron Tan's Avatar

Join Date: Jul 2007
Posts: 12
Converting to Junk Rig?

I was wondering if anyone had converted their sailboat to a junk rig, curious on experiences from people who actually have done it.

Also, somewhat related, about a year ago I saw a website where they were marketing this experimental kind of batwing rig, the mast and everything folded up like a DaVinci birdwing contraption. They said it could be mounted on any boat, they were even working on a giant model to be mounted on merchant ships so they use less fuel...when not needed, it folds away and disappears.

Website has disappeared, can't find where this company has gone to...ring any bells? They seemed to have gotten to beta testing it on small to midsize boats, and POOF gone. Interesting concept!
Ron Tan is offline   Reply With Quote
Old 26-07-2007, 20:04   #2
Registered User
 
SkiprJohn's Avatar

Join Date: May 2006
Location: Nicholasville, Kentucky
Boat: 15 foot Canoe
Posts: 14,191
Aloha Anton,
I think you'll get lots of hits about converting to junk rig if you search the internet. The rigs that you see in most marinas are the ones that endure and are easiest, safest and least expensive to use and maintain. Lots of experimental rigs have fallen by the wayside because they were not proven to be better than a marconi rigged sloop or ketch. Junk rigs have served junks for thousands of years but there is a reason why most folks don't use them much. Lateen rigs have been on the Nile for 6000 years and there is a reason why most folks don't use them much either.
Kind Regards,
JohnL
SkiprJohn is offline   Reply With Quote
Old 27-07-2007, 03:08   #3
Registered User
 
Ron Tan's Avatar

Join Date: Jul 2007
Posts: 12
Thank you, professor. Unexpressed thoughts can really burn a hole in a person's skull, can't they?

Quote:
Originally Posted by Anton R
I was wondering if anyone had converted their sailboat to a junk rig, curious on experiences from people who actually have done it.
Just freakin curious.
Ron Tan is offline   Reply With Quote
Old 27-07-2007, 04:02   #4
Senior Cruiser
 
GordMay's Avatar

Cruisers Forum Supporter

Join Date: Mar 2003
Location: Thunder Bay, Ontario - 48-29N x 89-20W
Boat: (Cruiser Living On Dirt)
Posts: 49,139
Images: 241
Junk Sail Tutorial ~ by Craig O'Donnell
Vincent Reddish on making a (more or less) traditional Chinese sail. Sail geometries by Hasler, Van Loan, Colvin and illustrations of Asian sails by Audemard and such.
http://www.friend.ly.net/~dadadata/junks.html
and:
http://www.friend.ly.net/~dadadata/junk/tutorial.html

Junk Knowledge ~ Junk and Advanced Cruising Rig Association
http://www.junkrigs.com/knowledge.htm

What About the Junk Rig...? ~ by Michael Kasten
What About The Junk Rig?
__________________
Gord May
"If you didn't have the time or money to do it right in the first place, when will you get the time/$ to fix it?"



GordMay is offline   Reply With Quote
Old 27-07-2007, 05:47   #5
Registered User

Join Date: Sep 2006
Location: Toronto
Posts: 223
Tom Colvin and his family sailed and lived on his junk rigged schooner for 18yrs. Basically his view is that a junk rigged boat will sail as well has anything else, if it was designed to carry junk rig. However, converting to a junk rig without carefull consideration, doesn't always work.
Check your local library to see if they might have some of his old books.
Efraim is offline   Reply With Quote
Old 27-07-2007, 08:30   #6
Moderator Emeritus
 
Pblais's Avatar

Join Date: Mar 2003
Location: Hayes, VA
Boat: Gozzard 36
Posts: 8,700
Images: 15
Send a message via Skype™ to Pblais
Modern sail cloth has made all these old sail rigs pointless. Materials in general have changed sailing more than any single factor. The junk rig does let you use almost any woven material as a sail since the design provides all the sail shape even if it isn't all that optimum. The idea may be curious but not worth actually doing.
__________________
Paul Blais
s/v Bright Eyes Gozzard 36
37 15.7 N 76 28.9 W
Pblais is offline   Reply With Quote
Old 27-07-2007, 11:03   #7
Registered User
 
SkiprJohn's Avatar

Join Date: May 2006
Location: Nicholasville, Kentucky
Boat: 15 foot Canoe
Posts: 14,191
Aloha Anton,
You're welcome.
Kind Regards,
JohnL
SkiprJohn is offline   Reply With Quote
Old 27-07-2007, 11:16   #8
Registered User
 
Ron Tan's Avatar

Join Date: Jul 2007
Posts: 12
Quote:
Originally Posted by Anton R
I was wondering if anyone had converted their sailboat to a junk rig, curious on experiences from people who actually have done it.


3rd time's the charm
Ron Tan is offline   Reply With Quote
Old 27-07-2007, 12:43   #9
Registered User

Join Date: Sep 2006
Location: Toronto
Posts: 223
If one is interested in single hand sailing, and isn't interested in spending big $$bucks$$ on sails (modern cloth) and rigging, and isn't interested on spending big $$bucks$$ on failure prone "systems", the junk rig has lots to offer.
Efraim is offline   Reply With Quote
Old 27-07-2007, 15:52   #10
Registered User
 
Squeaks's Avatar

Join Date: May 2007
Location: Oxnard / Alameda, CA
Boat: Golden Gate 30, Westerly 23
Posts: 169
Images: 3
Your best source of actual experience might be the junk rig discussion group (junkrig : A forum to discuss the design, building).
__________________
We can't change the wind - but we can adjust our sails.
Squeaks is offline   Reply With Quote
Old 28-07-2007, 17:38   #11
Registered User

Join Date: Sep 2006
Location: Toronto
Posts: 223
Quote:
Originally Posted by Pblais
Modern sail cloth has made all these old sail rigs pointless.
I would say the exact opposite is true.
Because of the new sail cloth, designers are now looking back at the "old" rigs to see what advantages they may offer.The best example of this would be recent designs of Nigel Irens.

Although better know for his super fast ocean racing cat designs, when it came time to design a cruising boat for his own needs he choose a lugger rig, a rig that is usually dismissed by people who have never seen one, let alone sailed a lug rigged boat.

So maybe it's time to ignore all the marketing fluff from the "boating community" and think outside the box for a change.



Efraim is offline   Reply With Quote
Old 28-07-2007, 19:18   #12
Registered User

Join Date: Nov 2005
Location: At the intersection of here & there
Boat: 47' Olympic Adventure
Posts: 4,852
If you can find the book "All in the same boat" by Paul Howard and Fiona McCall, it describes a Toronto family's circumnavigation in their boat Lorcha - a Dutch steel design, that they converted to junk-rig during the build. One of the chapters in the book goes into some detail about the reasoning and their experience with the rig. Hope that helps - your request is esoteric enough to be unlikely to generate comments from a first-hand viewpoint.
Lodesman is offline   Reply With Quote
Old 05-01-2008, 07:01   #13
Registered User

Join Date: Jan 2008
Posts: 1
Quote:
Originally Posted by Ron Tan View Post
I was wondering if anyone had converted their sailboat to a junk rig, curious on experiences from people who actually have done it.

Also, somewhat related, about a year ago I saw a website where they were marketing this experimental kind of batwing rig, the mast and everything folded up like a DaVinci birdwing contraption. They said it could be mounted on any boat, they were even working on a giant model to be mounted on merchant ships so they use less fuel...when not needed, it folds away and disappears.

Website has disappeared, can't find where this company has gone to...ring any bells? They seemed to have gotten to beta testing it on small to midsize boats, and POOF gone. Interesting concept!

Hi Ron,
Just joined forum. Re your enquiry about converting to junk, I have converted a Ferro 39 footer and now we are on our way around the world, or at least that is the plan.

Have a look at our web page at Home . where we have posted a few details of how we did it. The why is self explanatory and so far we have had no regrets.

Good luck, MikeP
MikeP is offline   Reply With Quote
Old 05-01-2008, 08:06   #14
Registered User

Join Date: Jan 2006
Location: Minnesota
Boat: Samson 39 Encore
Posts: 99
Ron,
I am rebuilding a ferrocement boat that was sailed for 9 years (liveaboards) with junk rig. The wood and fiberglass cabin and interior fell into disrepair and it will be two more years before she floats again.

You will find a lot of excellent material on this site as well as some posters with acute tunnel vision. Two words seem to close many peoples minds -- junk rig and ferrocement.

Junk rigs have more to do with ease of sailing than cost of cloth, etc. Releasing two lines on a two master reefs or drops the sails and these are usually led to the cockpit. Sails are not removed from the masts so scrambling around on deck in bad weather is not an issue. Dropped into boom gallows, they can be covered and lashed down in severe weather. The sails are self tending, managing them requires simply turning the rudder. The sails adjust to the new course. This is why they are very workable for river sailing.

There are several downsides. The masts are unstayed so you lose the stays as handholds and they are not as efficient pointing into the wind.

The book "Practical Junk Rig" by Blondie Hasler and JK McLeod is an excellent reference and goes into the theory as well as the practical side of building in or converting to junk rig. It has just been reprinted and while it's pricey at $75, it is well worth it.

Ellis
encore is offline   Reply With Quote
Old 05-01-2008, 09:16   #15
Registered User
 
stuartcnz's Avatar

Join Date: Dec 2006
Location: New Zealand
Boat: Hartley Tasman 27'3" Kaea (50/50 motor sailor) & Laurent Giles GK24 IOR 1/4 tonner
Posts: 57
Cambered Panels

In Norway there has been work done on improving windward performance of junk rigs using cambered panels, without compromising the simplicity of the rig. Check out the Yahoo rinkrig group for details.
stuartcnz is offline   Reply With Quote
Reply

Tags
junk rig

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
rig failure? irwinsailor Dollars & Cents 3 18-02-2008 07:26
fractional or masthead which is best? philip van praag Multihull Sailboats 24 20-06-2007 08:28
I need advice for a first purchase MrShankmmz Monohull Sailboats 34 16-03-2007 19:39
Cat Design - Cold moulded Wood Steven Prince Multihull Sailboats 41 06-03-2007 16:00
In the Event of Rig Failure GordMay Health, Safety & Related Gear 0 01-08-2004 04:36

Advertise Here


All times are GMT -7. The time now is 12:19.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.