Cruisers Forum
 


Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
Old 14-09-2021, 19:26   #1
Registered User

Join Date: Sep 2021
Posts: 2
Beneteau 50 deck seals for shrouds

I am not sure how the deck plates should be maintained or sealed to reduce corrosion and prevent leaks. There is an open ring between SS rod and the cover plate. It allows water and dirt to get under the plate. Not sure how to remove the plate to inspect and clean.

Not even sure of the open rind should be sealed.

If anyone knows how these deck plates can be removed or how they should be maintained that would be helpful.

Picture attached. It is 2012 hull.

thanks. Jim
Attached Thumbnails
Click image for larger version

Name:	Shroud Deck Plate.jpg
Views:	20
Size:	75.3 KB
ID:	245343  
Seabee Jim is offline   Reply With Quote
Old 14-09-2021, 21:39   #2
Registered User

Join Date: Feb 2019
Posts: 11
Re: Beneteau 50 deck seals for shrouds

This link from the Jeanneau user forum describes how to remove and replace the deck plate.. Scroll through to April 30, 2013 for the photos and explanation of the repair

https://jeanneau.proboards.com/threa...s-deck-fitting

There is probably similar information on the Beneteau frorums.
Hobby is offline   Reply With Quote
Old 16-09-2021, 20:08   #3
Registered User

Join Date: Sep 2021
Posts: 2
Re: Beneteau 50 deck seals for shrouds

Hobby: thanks for the link to shroud deck plat info. Very helpful Jim
Seabee Jim is offline   Reply With Quote
Reply

Tags
beneteau, deck, seals, shroud

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thoughts? Elevated deck moisture @shrouds LouK Monohull Sailboats 2 20-09-2019 08:28
Converting Beneteau metric shaft, bearings, seals etc. to SAE. Swami18 Propellers & Drive Systems 10 14-06-2017 15:44
shaft seals, lip seals,..oh my sailorboy1 Propellers & Drive Systems 50 04-03-2013 19:50
High Moisture Meter Readings in Deck Around Shrouds Papakina Construction, Maintenance & Refit 1 04-09-2012 22:31
EPDM Lewmar port seals (replacement) for leaking seals Panamajames Construction, Maintenance & Refit 3 05-03-2012 13:47

Advertise Here


All times are GMT -7. The time now is 01:59.


Google+
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Social Knowledge Networks
Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2021, vBulletin Solutions, Inc.

ShowCase vBulletin Plugins by Drive Thru Online, Inc.