I have a west marine
mounted on the aft rail. Nice grill
with a large main cooking
surface. I had to tweak the regulator
up a bit (open up the needle valve relative to the knob position) to make sure it would stay lit on very windy anchorages
Now it appears the burner tube has failed. The original welded/brazed seam ran along the top and has split open on the end.
WM and the manufacturer are of no help except to recommend I buy their new and improved (smaller) model.
I'd like to replace both the regulator
and the burner tube with a higher rated setup.
Anyone know of any sources? Or should I just weld the original back into one piece?